icon 05-07 ford f250/f350 7" stage 5 suspension system w radius arm k67104r
Product gallery

All pictures shown are for illustration purpose only. Lip size, concavity, and features on wheels will vary depending on wheel specs.
Approximately 50% increased front wheel travel over stock
Select a vehicle to confirm fitment
Confirm Vehicle Fitment
$8,506.89/ ea
Out of Stock
Fitment Guarantee
Warranty
Product Overview
OVERVIEW
2005-2007 FORD F-250/F-350 SUPER DUTY 7" LIFT STAGE 5 SUSPENSION SYSTEM WTIH RADIUS ARM
Features and Benefits
- Approximately 50% increased front wheel travel over stock
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- FK Rod End bearings provide extended longevity and minimal deflection
- Lifetime guarantee against coil spring breakage or sag
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- Progressive leaf springs improve ride quality without reducing towing capacity
- Fabricated radius arms with drop brackets offer on vehicle caster adjustment, increased strength, and improved tire clearance at steering lock
- ICON CDC Valve allows for 10 clicks of quick and easy compression adjustability
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Shocks are fully rebuildable and re-valvable
Tech Info
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00" Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
- Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY
- APPLICATION NOTE #21: NOT APPLICABLE ON VEHICLES EQUIPPED WITH A MANUAL TRANSMISSION
- APPLICATION NOTE #28: Pinch Weld On '05-'10 Superduty Radius Arms May Come In Contact With Radius Arm Drop Bracket Hardware
- APPLICATION NOTE #29: 7" Systems Using A 4-Link In Place Of The Factory Radius Arms Do Not Require The Use Of Alignment Cams. Caster Can Be Adjusted By The Lower Link Arms
- APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
- APPLICATION NOTE #57: RETAINS FACTORY BLOCK FOR TRUCK TO SIT LEVEL WITH FRONT OF TRUCK
- Ships in multiple boxes
System Components
- 67010 (QTY: 1) | 05-07 FSD FRONT 7" BOX KIT
- 67015 (QTY: 1) | 05-24 FSD FRONT 7" DUAL RATE SPRING KIT
- 64041 (QTY: 1) | 05-22 FSD RADIUS ARM SYSTEM
- 64040 (QTY: 1) | 05-10 FSD RADIUS ARM DROP KIT
- 138508 (QTY: 2) | 99-07 FSD 5" REAR LEAF SPRING PACK
- 37003 (QTY: 1) | 99-10 FSD REAR 15" U-BOLT KIT
- 67720CP (QTY: 1) | 05-24 FSD 4WD 7" FRONT 2.5 VS PB CDCV PAIR
- 37701CP (QTY: 1) | 99-24 FSD 3-6" REAR 2.5 VS PB CDCV PAIR
Technical Specifications
| Brand | ICON Suspension |
|---|---|
| MPN | K67104R |
WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov (opens in a new tab)
