icon 2005-2023 toyota tacoma/2007-2021 toyota tundra, non-icon uca 1" retrofit delta joint kit 614560

OVERVIEW

ICON's Delta Joint is more robust than a uniball and capable of greater angularity than a typical ball joint. Its metal-on-metal construction and a greaseable design increases longevity while also allowing for noise-free operation.

Features and Benefits

• Retrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1" uniball
• Retrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize
• Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
• Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
• Metal on metal internals and a greasable design for maximum longevity and noise-free operation
• Capable of high angularity required for lifted applications
• Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
• Pullout strength greater than comparable industry standard uniball
• Application specific taper pins for precise fit across a wide range of vehicles

Tech Info

• TECH NOTE: Replaces all WSSX16, AWX16, WC16, WE16, WSSB16, WR16, ABW16 uniballs with a 2.125" outside diameter and 1" height
• TECH NOTE: Retrofit kits are designed for use only on listed applications using stock length upper control arms.
• TECH NOTE: Fitment verification is the duty of the installer! Failure to cycle suspension and check for bind issues may lead to component failure and/or injury. Professional installation required.
• TECH NOTE: 1996-2004 Toyota Tacoma 4WD or PreRunner, 1996-2002 Toyota 4Runner, 2000-2006 Toyota Tundra, and 2001-2007 Toyota Sequoia also require retrofit hardware kit part number 614526