Skip to main content
FREE SHIPPING ON ORDERS OVER $500

icon 2023-2024 toyota sequoia, 3-4.25" lift, stage 4 3.0 suspension system, billet, trd k53254s

Product gallery

icon 2023-2024 toyota sequoia, 3-4.25" lift, stage 4 3.0 suspension system, billet, trd k53254s
1 / 9

All pictures shown are for illustration purpose only. Lip size, concavity, and features on wheels will vary depending on wheel specs.

Vehicle specific design for 2023-2024 Toyota Sequoia

Select a vehicle to confirm fitment

Confirm Vehicle Fitment

$12,391.59/ ea
Out of Stock
Fitment Guarantee
Warranty

Product Overview

OVERVIEW


Stage 4 includes 3.0 Series CDEV coilovers for 3-4.5" of front lift, greater performance, and 35" tire fitment. UCAs, rear links/track bar provide alignment correction and rear coils with 3.0 Series CDEV rear shocks balance the tuning.

Features and Benefits

  • Vehicle specific design for 2023-2024 Toyota Sequoia
  • 3.0 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
  • Adjustable front ride heights from 3-4.25" of front lift over stock
  • ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
  • ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes
  • Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
  • UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
  • Included sway bar drop brackets reduce bind in OE sway bar links
  • Allows for full wheel travel without overstressing OE components
  • Billet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
  • Dual rate rear coil springs improve performance and ride quality while providing 2" or 4" of rear lift, depending on the vehicle's stock suspension package
  • On-vehicle adjustable rear track bar properly centers rear axle while also improving rear suspension performance
  • 3.0 Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers
  • All ICON shock absorbers are fully rebuildable and re-tunable

Tech Info

  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75" Backspace / 25mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6" Backspace / 25mm Offset
  • Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
  • APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
  • APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
  • APPLICATION NOTE #141: Tundra/Sequoia equipped with automatic leveling headlights or Load-Leveling Rear Height Control Air Suspension, part # 55153 is also required
  • APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
  • APPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver / 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.
  • APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
  • APPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required
  • APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app
  • TECH NOTE: Most Sequoia submodels will have front lift height range of 3-4.25" over stock and 4" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.25" over stock and 2" of lift over stock in the rear. If shorter rear ride heights are desired, consider kit part number K53254.

System Components

  • 58775E (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA 3.0 VS RR CDEV COILOVER KIT
  • 58561DJ (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA BILLET UCA DJ PRO KIT
  • 55154 (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA SWAY BAR DROP KIT
  • 54002 (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA/24 TACOMA BILLET REAR LOWER LINK KIT
  • 54102 (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
  • 57845EP (QTY: 1) | 22-25 TUNDRA 0-1.5"/23-24 SEQUOIA 0-4" REAR 3.0 VS RR CDEV PAIR
  • 53508 (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA IIC INSTALL KIT
  • 51216 (QTY: 1) | 23-24 SEQUOIA TRD 2" DUAL RATE REAR SPRING KIT
  • 54202 (QTY: 1) | 22-25 TUNDRA/23-24 SEQUOIA/24 TACOMA/24 LC250/24 GX550 BILLET REAR ADJ TRACK BAR

Technical Specifications

Technical specifications for this product
BrandICON Suspension
MPNK53254S

WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov (opens in a new tab)

Element Wheels

Join the Inner Circle

Get exclusive access to flash sales, new drops, and expert fitment guides delivered to your inbox.