ReadyLIFT OEM-style rear block kits are available for model-specific applications. These Rear Block Kits include two (2) Rear Blocks, four (4) E-Coated U-Bolts, and eight (8) Nuts and Washers. The 26-3950 5" rear block kit will safely lift the rear an additional 4" after removing the factory 1" block. Based on OEM designs and never made out of lightweight extrusions, ReadyLIFT GM Blocks are made from cast iron and have built-in anti-rotation ears. Fits 2019-2022 new body style 6-lug model GM trucks. New models with OEM 1.25" blocks will want to take advantage of the additional 4" of lift for towing and hauling, particularly when using a front leveling kit. Eliminates the dangers of having stacked blocks which may be illegal in some states. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. Like all ReadyLIFT products, these block kits come with our Lifetime Warranty.
NOTE: ReadyLIFT recommends the use of the 67-3809 Rear Shock Extension Kit or longer shocks when using a lift block of this height. The 5" Rear Block Kit works great with our GM 6-lug 2.25" front leveling kits to achieve a mild lift stance with a slight rake.
NOTE: This GM 1500 kit is NOT COMPATIBLE with vehicles equipped with rear composite mono-leaf springs. The mono-leaf is easily identifiable – the U-bolt is round/circular around the top of the leaf spring. This kit only works with vehicle equipped with traditional steel leaf springs – identified by ‘square’ U-bolts.
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
