ReadyLIFT OEM-style rear tapered block kits are available for 2017-2022 Ford Super Duty SRW F250/F350 model specific applications. These new 6.5" Rear Tapered Block Kits include two (2) Rear Blocks, four (4) E-Coated U-Bolts, and eight (8) Nuts and Washers. Based on OEM designs and never made out of lightweight extrusions our 6.5" 2017-2022 Ford F250/F350 Super Duty Blocks have Integrated OEM Style Bump Stops. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work with your ReadyLIFT Suspension Leveling Kit. In fact, these blocks are the ideal Tow Package upgrade for not only for stock height vehicles but lifted or leveled trucks too! Like all ReadyLIFT products, these block kits come with our Limited Lifetime Warranty.
Note: 26-2765 6.5" block is for use on 2017-2022 Ford F250 / F350 Super Duty 2WD/4WD trucks with 1-piece driveshaft.
Lift height will vary depending on what factory block your truck has.
Note: Fits Single Rear Wheel Trucks ONLY -- Not Dual Rear Wheel Configurations
NOTE: The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs. Use of this type of airbag system will void all block warranties and can cause failure of the block bump stop tang.
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
