superlift 19-20 ford ranger 4wd 2in leveling kit 40050
Product gallery

All pictures shown are for illustration purpose only. Lip size, concavity, and features on wheels will vary depending on wheel specs.
Superlift 19-20 Ford Ranger 4WD 2in Leveling Kit 40050
- 2019-2022 Ford Ranger
- This is a complete 2” leveling kit for the 2019-2021 Ford Ranger
- This level kit levels the front 2” to bring level to the rear
- Covered by our Limited Lifetime Warranty and LIFT FORCE WARRANTY
- Front Strut Spacers and all hardware for the 2019-2021 Ford Ranger
- Detailed instruction manual walking you step-by-step through the leveling kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
- The best customer service and technical help in the industry.
Confirm Vehicle Fitment
Estimated Delivery: 2 to 7 Days
Product Overview
Take your Ford Ranger to a new height with an improved attitude and aggressive look with the Superlift LEVEL-IT 2 inch leveling Kit. SUPERLIFT’s Level-IT lift system is a perfect solution for anyone wanting an economical and easy way to level front to rear on the all-new 2019-2021 Ford Ranger Truck.
Whether it is simply leveling the truck’s stance or providing increased ground clearance for a more aggressive tire and wheel combination, these Level-It components work with factory suspension components to achieve modest ride height gains without breaking the bank.
Made of strong and durable high construction steel and powder coated, this Level-It kit is a super-simple 100% bolt-on installation and backed by a Limited Lifetime Warranty.
Features:
- Front Strut Spacer Leveling Kit
- Retains Factory Ride Quality
- Levels the Front end of the vehicle
- Adds clearance for 32” tires
- Backed by our Limited Lifetime Warranty
- 100% super-simple bolt-on installation
- Made in the USA
Benefits:
- Designed using existing suspension
- Maintain Factory Ride
- Increased Ground Clearance
- No Need to disassemble your struts to install
- Does not require a strut compressor
- Retains OEM caster and camber alignment specifications
- Works with all OEM Model Control Arms
- Corrosion Resistant
- Ideal for restoring lost height due to heavy front bumpers, winch/bumper combo, or snow plows
Technical Notes:
- Does not fit on 2WD version
- Aftermarket Wheels do require a minimum of 93.1mm center bore and max. backspacing of 6.5 inches.
- Aftermarket wheels with less backspacing than recommended may require some trimming
- 9 inch wide aftermarket wheels will require trimming
Tire and Wheel Info:
| Tire | Wheel | Backspacing (INCH) | Offset (MM) |
| 265|70|R17 | Factory | ||
| 255|75|R17 | Factory | ||
| 265|65|R18 | Factory | ||
| 265|60|R18 | 18 x 9 | 6.5 Inch | Plus 18mm |
| 265|60|R18 | 18 x 9 | 6.5 Inch | Plus 30mm |
| 275|55|R20 | 20 x 8 | 5.5 - 6.5 Inch | Plus 18mm |
| 275|55|R20 | 20 x 9 | 6.5 Inch | Plus 30mm |
***20 Inch wheel requires 93.1mm center bore
**20x9 aftermarket may require some trimming
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
Installation and Notes:
- Installation time: 2 hours
- Difficulty level: 2 of 5
Technical Specifications
| Brand | Superlift Suspension |
|---|---|
| MPN | 40050 |
WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov (opens in a new tab)
