Buick Verano Wheels and Rims

Buick Verano Aftermarket Wheel Fitment

The Buick Verano is the compact luxury sedan Buick built from 2012 through 2017 on the GM Delta II platform. It was Buick's first compact sedan in years and slotted below the Regal in the Buick lineup. The bolt pattern is 5x115 with a 70.3mm hub bore across every Verano model year and trim, with M12x1.5 thread pitch and conical seat lug nuts. Fitment is square front to rear by default. The Turbo trim with the 2.0L turbocharged four-cylinder is the enthusiast pick of the range, but the fitment box is the same as the base 2.4L. Element Wheels carries direct fitment for the 2012-2017 Verano and the catalog runs from 18 inch through 20 inch diameter. The Verano was discontinued after the 2017 model year as Buick exited the compact sedan segment in North America.

Find Your Buick Verano Year

Pick your year range to see wheels and rims that fit your specific Verano. The Verano ran a single generation from 2012 through 2017. Bolt pattern, hub bore, and thread pitch are consistent across every production year and every trim, including the Turbo.

The Buick Verano Bolt Pattern

The Verano runs the 5x115 bolt pattern with a 70.3mm hub bore across every production year (2012 through 2017). Lug count is 5. Thread pitch is M12x1.5. Lug type is conical seat (lug nuts, not bolts). This 5x115 / 70.3mm spec is consistent with the modern Buick lineup, including the LaCrosse, Regal, and Lucerne, and the bolt-on architecture lines up across those platforms (though brake clearance and offset windows differ).

A note on imperial nicknames. The 5x4.5 imperial label refers to 5x114.3 alone. 114.3mm equals exactly 4.5 inches, which is where the imperial name comes from. The Verano is 5x115 specifically. It is not 5x114.3, and the imperial 5x4.5 nickname does not apply. The 5x115 and 5x114.3 bolt circles differ by only 0.7mm but the studs do not seat correctly across patterns and the wheels do not safely interchange. Force-fitting a 5x114.3 wheel onto a Verano hub puts stress on the studs that will eventually fail. Confirm the 5x115 pattern before ordering. Compare against the rest of the Buick lineup at our Buick wheels and rims hub.

Why the Verano Was Buick's Compact Luxury Play

The Verano debuted for the 2012 model year as Buick's first compact luxury sedan in over two decades. It sat on the GM Delta II platform, ran front wheel drive, and was offered with either a 2.4L four-cylinder (base) or a 2.0L turbocharged four-cylinder (Turbo). The Turbo trim is the enthusiast pick of the range and is the variant most aftermarket builds target. The Verano also offered a six-speed manual transmission with the Turbo, an unusual choice in the Buick lineup of that era.

Buick discontinued the Verano in North America after the 2017 model year as the brand exited the compact sedan segment. The nameplate continued in China through later generations but those are not the same chassis. The fitment box on this page covers the 2012-2017 North American Verano only. Fitment on the Verano is straightforward by Buick standards. One generation, one bolt pattern, one hub bore, no Brembo variant, no AWD complication.

How We Confirm Fitment on Buick Verano Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the 2012-2017 Verano. For the Verano that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub protrusion past the mounting surface, lug seat depth, and turning clearance front and rear with 18 to 20 inch wheels installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. The Verano 70.3mm hub bore matches the rest of the modern Buick lineup so hub centric ring sizing is straightforward. We do not pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Buick Verano Wheels and Rims FAQ

Get Buick Verano Wheels Right the First Time

Pick your year above to see wheels and rims that fit. We measure on the 2012-2017 Verano and the catalog runs from 18 inch through 20 inch on the 5x115 / 70.3mm pattern. One generation, one bolt pattern, one fitment window across base and Turbo trims. Find your fit and start enjoying your build sooner.