Honda CR-V Wheels and Rims

Honda CR-V Aftermarket Wheel Fitment

The Honda CR-V is the top-selling compact crossover in the United States and the highest volume aftermarket wheel platform in the compact SUV segment. Honda has kept the CR-V on the same wheel hub spec across all six generations. Every CR-V from 1997 forward runs 5x114.3 with a 64.1mm hub bore and M12x1.5 lug nuts. The imperial nickname for 5x114.3 is 5x4.5 (114.3mm equals 4.5 inches). The bolt pattern matches the rest of the modern Honda lineup (Civic 2004 and up, Accord, Pilot, Passport, Ridgeline) and the modern Acura platforms (RDX, MDX). What has changed across the six CR-V generations is body size and the aftermarket diameter window the chassis supports. The smaller 1st through 4th gen CR-Vs run in the 15 to 20 inch range. The 5th gen (2017-2022) and 6th gen (2023 and up) accept up to 22 inch. The hybrid powertrain available on the 5th and 6th gens does not change the wheel hub spec. Pick your generation below for the fitment specs that apply to your specific CR-V.

Find Your Honda CR-V Generation

Pick your year range to see wheels and rims that fit your specific CR-V. Every CR-V from 1997 forward shares the same 5x114.3 bolt pattern and 64.1mm hub bore, so the wheels bolt to the same hub across generations. Body proportion, brake spec, and fender clearance change from generation to generation, which is why we measure each one separately.

The Honda CR-V Bolt Pattern

Every Honda CR-V from the 1st gen (1997-2001) through the current 6th gen (2023 and up) uses 5x114.3 with a 64.1mm hub bore and M12x1.5 lug nuts. Honda has held that spec across the entire CR-V lifespan, which is unusual for a platform that has been in production for nearly three decades. The imperial nickname for 5x114.3 is 5x4.5 because 114.3mm equals exactly 4.5 inches.

One detail that catches buyers: 5x114.3 is NOT the same as the 5x115 pattern used on some American sedans. The two patterns sit roughly 0.7mm apart and are not interchangeable. The imperial nickname 5x4.5 refers ONLY to 5x114.3. The Chrysler 300, Dodge Charger LX, and Dodge Challenger use the 5x115 pattern, and those wheels will not fit your CR-V. Stick to 5x114.3 / 5x4.5 specifically.

The 5x114.3 / 64.1mm spec on the CR-V matches the rest of the modern Honda lineup: Civic from 2004 and up, Accord, Pilot, Passport, Ridgeline, and the Acura RDX and MDX. The wheels bolt to the same hub. Body proportion and brake clearance do not always cross between models, but the bolt pattern is consistent. Compare across the rest of the Honda lineup at our Honda wheels and rims hub.

Why Generation and Wheel Size Determine CR-V Fit

Bolt pattern and hub bore are constant across all six CR-V generations. What changes is body proportion, brake size, and the diameter window the chassis can run cleanly. The 1st gen CR-V (1997-2001) is a small body sized around a 15 or 16 inch wheel. Each generation since has grown longer, wider, and taller, and the aftermarket diameter window has grown with it. By the 5th gen (2017-2022) and 6th gen (2023 and up), the CR-V can run up to a 22 inch wheel without losing factory ride character at the lower end of the window. 18 inch is the most common 5th and 6th gen aftermarket choice. The CR-V is square (non-staggered) on every generation. The same wheel spec works front and rear on every trim. Square is also the right configuration for a FWD or AWD compact crossover with no rear-bias drivetrain.

The hybrid powertrain available on the 5th gen (2017-2022 hybrid trims) and across the 6th gen lineup does not change the wheel hub spec. Hybrid CR-Vs run the same 5x114.3 bolt pattern, the same 64.1mm hub bore, and the same M12x1.5 lug nuts as the gas-only CR-Vs of the same generation. Trim level (LX, EX, EX-L, Touring, Sport, Sport Touring on the 6th gen) does not change the hub spec either, though the higher trims often ship with a larger factory wheel.

How We Confirm Fitment on Honda CR-V Wheels

Element Wheels measures fitment on every platform we sell wheels for, including every CR-V generation back to the 1997 1st gen. For the CR-V that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation at 64.1mm, lug seat geometry for M12x1.5 nuts, turning clearance at full lock, and the body proportion change between generations. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Honda CR-V Wheels and Rims FAQ

Get Honda CR-V Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the CR-V across all six generations, confirm the 5x114.3 / 64.1mm hub spec separate from the easy-to-confuse 5x115 pattern on American sedans, and publish the diameter and width windows for each generation. Find your fit and start enjoying your build sooner.