Honda Fit Wheels and Rims

Honda Fit Aftermarket Wheel Fitment

The Honda Fit is Honda's subcompact hatchback, sold globally as the Jazz and launched in North America for the 2007 model year. Honda discontinued the Fit in North America after the 2020 model year. Element Wheels measures fitment on both North American generations: the 2nd gen GE (2007-2014) and the 3rd gen GK (2015-2020). The Fit carries a 4x100 bolt pattern with a 56.1mm hub bore across every NA-market year, the same 4-lug subcompact standard Honda uses on the 1980-2003 base Civic and on the modern HR-V. The Fit also runs square (same wheel spec front and rear) on every generation, with the brake package matched front to rear. Find your generation below for the fitment specs that apply to your specific Fit.

Find Your Honda Fit Generation

Pick your year range to see wheels and rims that fit your specific Fit. Both North American generations share the same 4x100 bolt pattern and 56.1mm hub bore. What changes between the GE and GK generations is the aftermarket diameter and width window, plus the fender and brake clearance behind the wheel face. Count the lugs to confirm: every NA-market Fit is a 4-lug car.

The Honda Fit Bolt Pattern

Every North American Honda Fit, GE and GK, runs 4x100 with a 56.1mm hub bore. That is the Honda 4-lug subcompact standard, shared with the 1980-2003 base Civic, the Honda Insight, and the modern HR-V. 4x100 is one of the most common 4-lug patterns in the import aftermarket, so wheel selection at the Fit's diameter range is broad. The 56.1mm hub bore is the Honda subcompact hub spec, smaller than the 64.1mm hub used on the 2004-and-newer Civic and the modern Honda Accord. A wheel built for an Accord or a modern Civic carries a larger centerbore than a Fit hub. Hub centric rings address that gap when the aftermarket wheel centerbore is larger than 56.1mm.

The Fit has stayed on 4x100 across every NA-market year. There is no bolt-pattern transition to verify by VIN. If your car says Honda Fit on the badge and the model year is between 2007 and 2020, the wheel pattern is 4x100. Compare across the rest of the Honda lineup at our Honda wheels and rims hub.

GE vs GK and the Aftermarket Fitment Window

The 2nd gen GE (2007-2014) and 3rd gen GK (2015-2020) share the same bolt pattern, hub bore, and square fitment philosophy, but the brake clearance and fender room behind the wheel changed between the two. The GE is the tuner-friendlier of the two in our experience. The chassis sits lower, the rear arch has slightly more room, and aftermarket 16 and 17 inch builds are common in the JDM-inspired Fit community. The GK is the boxier, taller-roofed redesign. The fender openings are larger, but the brake package is also larger, and aftermarket builds tend toward 17 and 18 inch diameters with a slight bias toward conservative widths to keep the ride quality the Fit is bought for.

The Fit runs square (same width front and rear) across every model year. The aftermarket sticks to square. The Fit is a front-wheel-drive subcompact where the front axle carries the power and tire rotation between front and rear is part of the maintenance routine. A square setup keeps that simple. There is no factory staggered Fit in the NA market.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Honda Fit Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both North American Fit generations from the 2007 GE through the 2020 GK. For the Fit that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper clearance behind the wheel face, hub bore confirmation on the 56.1mm Honda subcompact hub, lug seat geometry, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Honda Fit Wheels and Rims FAQ

Get Honda Fit Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on both NA-market Fit generations, the GE and the GK, and confirm hub-fit on the 56.1mm Honda subcompact hub. Find your fit and start enjoying your build sooner.