Hyundai Palisade Wheels and Rims

Hyundai Palisade Aftermarket Wheel Fitment

The Hyundai Palisade is Hyundai's flagship three-row SUV, launched as a 2020 model to replace the older Santa Fe XL and currently in production. The Palisade has stayed on a single platform since launch, with the Hyundai/Kia midsize SUV 5x114.3 bolt pattern and a 67.1mm hub bore. From the factory, the Palisade ships with 18 inch wheels on base trims and steps up to 20 inch on Limited and Calligraphy. The XRT off-road trim runs an 18 inch all-terrain setup, and the Calligraphy luxury trim runs 20 inch from the dealer. Element Wheels has measured the Palisade fitment window from 18 inch through 22 inch. This is a square (same width front and rear) build by default. Fitment notes below.

The Hyundai Palisade Bolt Pattern

Every Hyundai Palisade from launch (2020) through the current model year uses 5x114.3 with a 67.1mm hub bore. The pattern is also written 5x4.5 in imperial because 114.3mm equals 4.5 inches. 5x114.3 is one of the most common 5-lug patterns in the world. Within Hyundai-Kia, the Palisade and the Kia Telluride are platform siblings on the same midsize SUV chassis, so the bolt pattern, hub bore, and broader fitment box cross between them by design. What does not transfer cleanly across other 5x114.3 vehicles is the 67.1mm hub bore and the Palisade-specific offset window, which depend on the chassis and brake package.

Compare against the rest of the Hyundai lineup at our Hyundai wheels and rims hub.

Palisade Factory Spec and the Aftermarket Window

From the dealer, the Palisade ships with 18 inch wheels on base SE and SEL trims, 20 inch wheels on Limited and Calligraphy, and the XRT off-road trim runs 18 inch with a more aggressive all-terrain tire. Factory hub bore is 67.1mm across every trim. The aftermarket fitment window opens up the upgrade range: customers commonly step a base 18 inch trim up to 20 or 22 inch, Calligraphy buyers commonly stay at 20 inch but switch to a different style, and XRT buyers usually stay at 18 inch but switch to a more aggressive all-terrain wheel. The Palisade runs square (same width front and rear) in every factory configuration we have measured.

How We Confirm Fitment on Hyundai Palisade Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Palisade. For this SUV that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper clearance, hub bore confirmation on the 67.1mm Hyundai/Kia hub, lug stud height, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what produced the fitment window on this page. It is also why every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Hyundai Palisade Wheels and Rims FAQ

Get Hyundai Palisade Wheels Right the First Time

Use the customer tools below to dial in the right wheels for your Palisade. We measure on the Palisade platform and stock fitments from 18 inch through 22 inch.