Hyundai Tucson Wheels and Rims

Hyundai Tucson Aftermarket Wheel Fitment

The Hyundai Tucson is one of the highest-volume compact crossovers in the US market and one of our steadiest aftermarket wheel and rim sellers across the four-generation run. The bolt pattern has stayed constant since the platform launched. From the 1st gen JM (2005-2009) through the current 4th gen NX4 (2022 and up), the Tucson runs 5x114.3 with a 67.1mm hub bore. Element Wheels measures fitment on all four generations, tracks the Hybrid and Plug-in Hybrid powertrains on the NX4, and covers the N Line sport trim on the TL and NX4. The Tucson is also same-chassis with the Kia Sportage on the modern Hyundai-Kia midsize crossover platform, so the bolt pattern and hub bore cross between the two cars by design. Pick your generation below for the fitment specs that apply to your specific Tucson.

Find Your Hyundai Tucson Generation

Pick your generation to see wheels and rims that fit your specific Tucson. The bolt pattern is 5x114.3 with a 67.1mm hub bore on every Tucson from launch through the current NX4. The fitment window changes by generation as the wheel diameter steps up from 16 inch (early JM) to 22 inch (NX4 aftermarket ceiling).

The Hyundai Tucson Bolt Pattern

Every Hyundai Tucson built since the platform launched in 2004 (US debut 2005) uses 5x114.3 with a 67.1mm hub bore. That covers the JM (2005-2009), the LM (2010-2015), the TL (2016-2021), and the current NX4 (2022 and up). The 5x114.3 pattern is also written as 5x4.5 in imperial; 5x4.5 refers ONLY to 5x114.3 (114.3mm = 4.5 inches). It does NOT refer to 5x115, which is a different bolt pattern used on Chrysler 300, Dodge Charger LX, and similar American sedans. The two patterns sit about 0.7mm apart and are not interchangeable. A 5x115 wheel will not bolt onto a Tucson.

The 67.1mm hub bore is the Hyundai-Kia midsize crossover standard, not the same as the Toyota family 60.1mm bore. 5x114.3 wheels listed specifically for a Toyota Camry, RAV4, or Highlander will physically bolt to a Tucson because the bolt math matches, but the smaller Toyota centerbore wheel will not hub-center on the Tucson without a hub centric ring (or the wheel uses a 67.1mm centerbore intended for the Hyundai-Kia hub). Tucson-specific wheel listings on our site use the 67.1mm centerbore by default. Compare across the rest of the Hyundai lineup at our Hyundai wheels and rims hub.

Tucson and Sportage: Same Chassis, Same Bolt Pattern

The Hyundai Tucson and Kia Sportage are platform siblings inside the Hyundai-Kia corporate group. The current 4th gen Tucson NX4 (2022 and up) and the current 5th gen Kia Sportage NQ5 (2023 and up) sit on the shared Hyundai-Kia N3 platform with the same bolt pattern, hub bore, and similar fitment windows. Earlier generations of the two cars were also platform-paired, so the 5x114.3 / 67.1mm spec has held across every modern Tucson and Sportage. A wheel that fits a Tucson NX4 will physically bolt to a Sportage NQ5 (and vice versa), though brake clearance and final offset window are measured on each car separately at our Chandler, Arizona facility. If you have a Sportage instead of a Tucson, the right hub is the Kia Sportage wheels and rims hub.

Tucson trims share the same fitment window within a generation. SE, SEL, Limited, XRT, and the N Line on a given TL or NX4 all use 5x114.3 with a 67.1mm hub bore and run square (same width front and rear). The Tucson Hybrid and Plug-in Hybrid (NX4, 2022 and up) share the same bolt pattern, hub bore, brake package, and fitment window as the gasoline Tucson of the same trim. The hybrid and plug-in hybrid powertrains do not change wheel fitment. The N Line trim on the TL and NX4 carries a sport-tuned suspension and styling cues, but in our catalog the N Line sits in the same aftermarket fitment window as the rest of the trim lineup.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Hyundai Tucson Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every Tucson generation back to the 1st gen JM. For the Tucson that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation on the 67.1mm Hyundai-Kia hub, lug seat geometry, and turning clearance at full lock with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Hyundai Tucson Wheels and Rims FAQ

Get Hyundai Tucson Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Tucson platform across every generation, track the Hybrid and Plug-in Hybrid powertrains, and flag the N Line sport-package window. Find your fit and start enjoying your build sooner.