Infiniti QX60 Wheels and Rims

Infiniti QX60 Aftermarket Wheel Fitment

The Infiniti QX60 is the Infiniti 3-row luxury crossover and one of the cleanest fitment platforms we sell wheels for. It launched as the JX35 for the 2013 model year, was renamed to QX60 in 2014, ran the 1st generation through 2020, took 2021 off (no model year produced), and returned as the 2nd generation in 2022. Every JX35 and QX60 uses the same bolt pattern, hub bore, and thread pitch: 5x114.3 (also called 5x4.5) with a 66.1mm hub bore and 12x1.25 thread. The QX60 is a same-chassis platform sibling of the Nissan Pathfinder; both vehicles share the underlying architecture and their bolt-on fitment is direct. Element Wheels measures fitment on every QX60 generation and the JX35 it replaced. Find your year range below and the wheel and rim recommendations follow.

Find Your Infiniti QX60 Generation

Pick your year range to see wheels and rims that fit your specific QX60. Bolt pattern, hub bore, and thread pitch are identical across every generation, so the differences between leaves are about brake clearance, fender clearance, and the factory wheel diameter step.

The Infiniti QX60 Bolt Pattern

Every JX35 and QX60 from 2013 forward uses 5x114.3 with a 66.1mm hub bore. The pattern is also written as 5x4.5 in imperial (114.3mm equals 4.5 inches). Infiniti has held that spec consistent across the JX35 (2013), the rename to QX60 in 2014, the rest of the 1st generation through 2020, the 2021 skip year, and the entire 2nd generation from 2022 onward. The 66.1mm hub bore is the Nissan / Infiniti midsize crossover and SUV standard, used on the Pathfinder, the Murano, the QX50, and several other Nissan / Infiniti models. The thread pitch is 12x1.25 (which is Nissan / Infiniti standard, narrower than the 12x1.5 used on most Toyota and Honda passenger cars).

One detail that catches buyers: 5x114.3 is NOT the same as the 5x115 pattern used on some American sedans. The two patterns sit roughly 0.7mm apart and are not interchangeable. The imperial nickname 5x4.5 refers ONLY to 5x114.3 (114.3mm = 4.5 inches). The Chrysler 300, Dodge Charger LX, and similar 5-lug American sedans use 5x115, and those wheels will not fit your QX60. Stick to 5x114.3 / 5x4.5 specifically. Compare across the rest of the Infiniti lineup at our Infiniti wheels and rims hub.

QX60 / Pathfinder Platform Share and the JX35 Name Change

The QX60 is a same-chassis platform sibling of the Nissan Pathfinder. Both vehicles share the underlying architecture (Nissan's D-platform, then the FF-L platform for the 2nd gen), the bolt pattern (5x114.3), the hub bore (66.1mm), and the thread pitch (12x1.25). Bolt-on compatibility is direct. The Pathfinder is the volume Nissan 3-row crossover; the QX60 is the Infiniti luxury version of the same vehicle. Brake packages and ride heights differ slightly between the QX60 and Pathfinder, so we still measure each separately for fitment-window accuracy, but the wheels themselves cross between the two platforms.

The 2013 JX35 was the same vehicle as the early QX60. Infiniti renamed the entire lineup in 2014 to a unified Q-and-QX naming scheme: cars became Q models and SUVs became QX models. The JX35 became the QX60. Specs and chassis did not change at the rename. A wheel that fits a 2013 JX35 also fits a 2014 QX60.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Infiniti QX60 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every QX60 generation back to the JX35. For the QX60 that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper clearance, hub bore confirmation on the Nissan / Infiniti 66.1mm hub, lug stud thread on the 12x1.25 spec, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Infiniti QX60 Wheels and Rims FAQ

Get Infiniti QX60 Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the QX60 platform across both generations and the JX35 it replaced, separating the 1st gen from the 2nd gen for brake-clearance and fender accuracy even though the bolt-on spec stays the same. Find your fit and start enjoying your build sooner.