Lincoln MKC Wheels and Rims

Lincoln MKC Aftermarket Wheel Fitment

The Lincoln MKC is Lincoln's compact luxury crossover, in production from the 2015 through the 2019 model year on the Ford Global C platform (the same chassis architecture as the 2013-2019 Ford Escape third generation). The MKC was Lincoln's first entry into the compact luxury crossover segment and was replaced for 2020 by the Lincoln Corsair on the next-generation Ford C2 platform. Across the full 2015-2019 production our catalog locks the MKC on a 5x108 bolt pattern (also called 5x4.25 inch, because 108mm equals 4.25 inch) with a 63.4mm hub bore. Lug count is five and the thread pitch is M12x1.5 lug nuts. Every MKC in our catalog runs square fitment (same width and offset front and rear). Compare across the rest of the Lincoln lineup at our Lincoln wheels and rims hub.

Find Your Lincoln MKC

Pick your year range to see wheels and rims that fit your specific MKC. Bolt pattern (5x108), hub bore (63.4mm), and lug hardware (M12x1.5 lug nuts) are constant across the full 2015-2019 MKC production run, including the Premiere, Select, Reserve, and Black Label trims. The aftermarket diameter window runs 18 to 20 inch and the aftermarket width window runs 7.5 to 9 inch front and rear (square fitment) on every MKC.

The Lincoln MKC Bolt Pattern

Every Lincoln MKC we measure uses a 5x108 bolt pattern (also called 5x4.25 inch, because 108mm equals 4.25 inch) with a 63.4mm hub bore. That covers the entire production run from 2015 through 2019 across every trim, including the Premiere, Select, Reserve, and Black Label specs. Lug count is five and the thread pitch is M12x1.5 lug nuts. 5x108 is the Ford and Lincoln spec used across most of the modern Lincoln compact and midsize lineup. It is NOT the same as 5x114.3 (the 5x4.5 inch pattern used on the Ford Mustang and on the larger Lincoln Aviator). Wheels listed for a 5x114.3 vehicle will not fit a 5x108 MKC even though both are five lug.

The MKC was built on the Ford C1 (also called Global C) platform, the same compact crossover chassis as the 2013-2019 Ford Escape third generation. The Lincoln version uses the same bolt pattern and hub bore as the Escape and the brake architecture is closely related, but the MKC has its own Lincoln tuned suspension and its own factory wheel sizes. When the MKC was renamed the Lincoln Corsair for 2020, it moved to the next-generation Ford C2 platform (the platform-mate of the 2020 and up Ford Escape fourth generation). The Corsair carries the same 5x108 bolt pattern and 63.4mm hub bore as the MKC but moves to M14x1.5 lug nuts, so MKC wheels do not bolt directly to a Corsair without verifying lug nut compatibility.

How MKC Trim Affects Wheel Choice

Every MKC in our catalog runs square fitment. Same width front and rear, same offset front and rear. The MKC is available with front wheel drive on entry trims and all wheel drive on the higher trims, but the drivetrain does not change the wheel spec. Front and all wheel drive MKCs share the same bolt pattern, hub bore, lug hardware, and aftermarket fitment window. The Black Label trim ships with a unique factory wheel design, but the bolt math is identical to the Premiere, Select, and Reserve trims.

The MKC shipped from the factory on 18, 19, and 20 inch wheels depending on trim and year. The base Premiere ran 18 inch and the higher trims stepped up to 19 and 20 inch. Our measured Element aftermarket diameter window runs 18 to 20 inch on every MKC and the aftermarket width window runs 7.5 to 9 inch front and rear. The MKC buyer in 2015-2019 was shopping against the Audi Q5, BMW X3, and Mercedes-Benz GLC, and the aftermarket build leans toward looks first. Customers shop the MKC for a more aggressive face style than the factory wheel, a deeper concave look, and a step up in diameter on Premiere and Select trims to match the 20 inch Reserve and Black Label footprint.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Lincoln MKC Wheels

Element Wheels measures fitment on the MKC directly. For the MKC that means clearance from the wheel to the fender on both axles, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation to the 63.4mm Lincoln hub, and lug nut seat depth on the aftermarket wheel against the M12x1.5 MKC hardware. We also confirm the square front-to-rear offset and width relationship that holds across every MKC row in our catalog. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Lincoln MKC Wheels and Rims FAQ

Get Lincoln MKC Wheels Right the First Time

Pick your year range above to see wheels and rims that fit. We measure on the MKC directly, confirm the square front-to-rear relationship, and check lug nut seat depth against the M12x1.5 MKC hardware (different from the M14x1.5 used on the 2020 and up Corsair). Find your fit and start enjoying your build sooner.