Maserati Ghibli Wheels and Rims

Maserati Ghibli Aftermarket Wheel Fitment

The Maserati Ghibli is Maserati's mid-size four-door sedan, slotted below the Quattroporte in the Italian luxury lineup. The modern Ghibli (M157, 2014-2024) sits on the Chrysler 300 LX platform, a same-chassis fact from the Fiat-Chrysler ownership era. That is the lineage behind the Ghibli's 5x114.3 bolt pattern and the 67.1mm hub bore, both of which match the Quattroporte M156 sibling. On the aftermarket side the Ghibli splits by brake package. A 4-piston standard brake car and a 6-piston upgrade brake car (which includes the V8 Trofeo trim) where the front caliper sits deeper behind the wheel face. The factory wheel hardware is lug bolts, not lug nuts on studs, which is the Italian and European convention on this platform. Pick your brake variant below and the fitment specs follow. The four-door Quattroporte is documented at /wheels/maserati/quattroporte.

Find Your Maserati Ghibli Variant

Pick your brake package to see wheels and rims that fit your specific Ghibli. Bolt pattern (5x114.3), centerbore (67.1mm), and the lug-bolt hardware are constant across both variants. What changes is the front caliper depth, and that drives the front offset window. The 6-piston package is also the brake setup on the V8 Trofeo trim.

The Maserati Ghibli Bolt Pattern

Every Maserati Ghibli we have measured uses 5x114.3 (also called 5x4.5, because 114.3mm equals 4.5 inches). That covers both the 4-piston standard brake variant and the 6-piston upgrade brake variant across the 2014-2024 M157 production run. Hub bore is 67.1mm. These specs match the Quattroporte M156 sibling, because both cars share the Chrysler 300 LX platform underneath the Italian bodywork.

Important spec callout: 5x114.3 is NOT the same as 5x115. The two patterns look close on paper (a 0.7mm difference in bolt circle) but they do not interchange. A 5x115 wheel will not safely fit on a 5x114.3 hub even though the math is close. Stud stress and seat alignment go wrong fast on a mismatched pattern, which is why we publish the exact pattern rather than calling them close enough. Confirm the wheel you are looking at is specifically rated for 5x114.3 before ordering. The factory hardware on the Ghibli is M14x1.5 lug bolts that thread directly into the hub. Compare across the rest of the Maserati lineup at our Maserati wheels and rims hub.

Why the Brake Package and the LX Platform Matter

The Ghibli splits at the brake package. The 4-piston standard brake car runs a more permissive front offset window because the caliper sits inside a wider clearance envelope. The 6-piston upgrade brake variant (which includes the V8 Trofeo trim) needs a more aggressive front-side offset to clear the larger caliper, and the aftermarket fitment window tightens accordingly. Rear axle offset window and width window stay similar across both variants. If you are not sure which brake package your Ghibli has, our team can confirm from the VIN or a photo of the caliper.

Same-chassis fact, not cross-brand trivia: the Ghibli sits on the Chrysler 300 LX platform. That explains the 5x114.3 bolt pattern and the 67.1mm hub bore on a car that wears a Maserati trident. The Maserati-specific bodywork, brake package, suspension tuning, and fender geometry mean we measure the Ghibli separately from any 300 we have data on. A wheel that fit on a Chrysler 300 will not automatically work on a Ghibli because the offset windows are different and the fender geometry is different. Stagger on the Ghibli is optional (catalog FT=3). Some customers run a true square fitment and some go with a wider rear for the more aggressive stance. Both work inside our measured window.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Maserati Ghibli Wheels

Element Wheels measures fitment on the Ghibli directly, on both the 4-piston and 6-piston brake variants of the M157. For the Ghibli that means clearance from the wheel to the fender on both axles, gap between the back of the wheel and the suspension, brake caliper height (4-piston and 6-piston are measured separately because the front caliper depth changes between them), hub bore confirmation to the 67.1mm Maserati hub, lug bolt seat depth, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do. The Ghibli carries lug bolts rather than lug nuts on studs, which is a real fitment-side consideration: bolt seat depth and bolt thread length need to be confirmed for each aftermarket wheel.

Maserati Ghibli Wheels and Rims FAQ

Get Maserati Ghibli Wheels Right the First Time

Pick your brake variant above to see wheels and rims that fit. We measure on the Ghibli directly across both 4-piston and 6-piston brake packages (including the V8 Trofeo) and we account for the lug-bolt hardware on every wheel we recommend. Find your fit and start enjoying your build sooner.