Mazda 2 Wheels and Rims

Mazda 2 Aftermarket Wheel Fitment

The Mazda 2 is the subcompact hatchback Mazda sold in North America for the 2011 through 2014 model years on the DE chassis, the global B-segment platform that Mazda co-developed with Ford. The Mazda 2 is a small light front wheel drive car aimed at city driving and fuel economy, and the aftermarket wheel and tire scene around the car is mostly about finding a flush stance and a clean look on a small body without compromising the everyday usability of the car. Element Wheels measures fitment on the 2011-2014 Mazda 2 directly. The Mazda 2 is 4x100 with a 54.1mm hub bore, 12x1.5 lug nuts, on a 4-lug hub. Square fitment only, matched front-rear brake, front wheel drive end to end. Pick your generation below.

Find Your Mazda 2 Generation

The Mazda 2 ran one generation in North America, the 2011 through 2014 DE chassis. Element Wheels maintains a measured fitment catalog row for the 2011-2014 Mazda 2 spanning the full North American run. Pick the card below to see wheels and rims that fit.

The Mazda 2 Bolt Pattern and Hub Bore

Every 2011-2014 Mazda 2 runs 4x100 with a 54.1mm hub bore, 12x1.5 lug nuts, on a 4-lug hub. The 4x100 pattern is the small 4-lug hub standard used widely across Mazda subcompact and small Mazda passenger cars of the late 1990s through the mid 2010s, including the 1990-1998 Mazda Protege, the 1990-1995 Mazda MX-3, the 1990-2005 Miata, the 1991-1995 Mazda 323, and other compact Mazda models of that era. Hub bore on the Mazda 2 is 54.1mm. A wheel with a centerbore larger than 54.1mm needs hub centric rings to bring the bore down to the Mazda 2's hub diameter. If your fitment needs rings, they'll be included with the order.

The Mazda 2 is a platform sibling of the 2011-2019 Ford Fiesta. Both cars are built on the same Ford-Mazda B3 global B-segment architecture. That said, the US-market Ford Fiesta does not share the Mazda 2's wheel bolt pattern. The two cars look interchangeable in the parking lot, but the Fiesta runs a different lug pattern than the Mazda 2 on US-spec trims, so wheels do not cross-shop directly between them. Stay on the 4x100 / 54.1mm spec for your Mazda 2. Compare across the rest of the Mazda lineup at our Mazda wheels and rims hub.

Why the Mazda 2 Fitment Window is Small but Specific

The Mazda 2 is a small light car with short suspension travel and a tight fender well. The aftermarket diameter range Element Wheels measured on the 2011-2014 Mazda 2 is 15 to 17 inch. The aftermarket width range is 6 to 7 inch square. Most Mazda 2 owners who upgrade run a 16 or 17 inch wheel with a moderate offset that brings the wheel face flush to the fender without pushing the tire past the body line. Going past 17 inch on a Mazda 2 typically means the sidewall gets so thin that the ride quality drops noticeably on a chassis that depends on tire sidewall to absorb road impact. The 4x100 lug pattern also limits how aggressive the wheel face can get because stud-to-stud spacing is narrow.

The Mazda 2 runs square (same width front and rear) from the factory and on every aftermarket build we measure. Brake size is matched front to rear from the factory. The car is front wheel drive, so tire rotation is part of normal maintenance and square fitment makes that rotation simple. There is no factory staggered Mazda 2 and no aftermarket reason to stagger one.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Mazda 2 Wheels

Element Wheels measures fitment on the 2011-2014 Mazda 2 directly. That means clearance from the wheel to the fender on a tight subcompact body, gap between the back of the wheel and the front strut, hub bore confirmation at 54.1mm, lug seat geometry on the M12x1.5 thread on a 4-lug hub, and turning clearance at full lock on a small front wheel drive chassis. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The 4x100 / 54.1mm hub spec on the Mazda 2 cross-references multiple Mazda passenger cars we also measure, including the 1990-1998 Mazda Protege, the early Mazda MX-3, and the original Miata. Measured data on those platforms helps inform the offset window we publish for the Mazda 2, although the body, suspension geometry, and fender well are different on every car so each one gets its own catalog row.

Mazda 2 Wheels and Rims FAQ

Get Mazda 2 Wheels Right the First Time

Pick the generation card above to see wheels and rims that fit your 2011-2014 Mazda 2. The Mazda 2 is 4-lug / 4x100 / 54.1mm, square fitment, matched front-rear brake, front wheel drive. We measure the Mazda 2 directly at our Chandler, Arizona fitment facility. Find your fit and start enjoying your build sooner.