Mercedes-Benz CLE-Class Wheels and Rims

Mercedes-Benz CLE-Class Aftermarket Wheel Fitment

The Mercedes-Benz CLE-Class is the new C236 coupe and convertible Mercedes introduced for 2024 to consolidate the prior C-Class Coupe / Cabriolet and the E-Class Coupe / Cabriolet under a single nameplate. Element Wheels measures the CLE across two catalog rows: the CLE 300 4MATIC and CLE 450 4MATIC (2024 and up, all wheel drive) and the AMG CLE 53 Coupe (2024 and up, AMG performance variant). Bolt pattern is 5x112 with a 66.56mm hub bore on every CLE variant. Lug fastener is M14x1.5, lug bolt style (Mercedes uses a bolt that threads into the hub, not a stud with a separate lug nut). Both trims run staggered from the factory: the CLE 300 / 450 with a mild stagger to match the 4MATIC layout, and the AMG CLE 53 with a wider stagger and the larger AMG brake package. What changes inside the lineup is the width window, the brake clearance, and the maximum aftermarket diameter. Pick your trim below for the fitment specs.

Find Your Mercedes-Benz CLE-Class Trim

Pick your trim to see wheels and rims that fit your specific CLE. Bolt pattern is 5x112 / 66.56mm CB on every variant. Both trims run staggered from the factory. What changes is the width window, the maximum aftermarket diameter, and the brake clearance on the AMG trim.

The Mercedes-Benz CLE-Class Bolt Pattern

Every Mercedes-Benz CLE in our catalog uses 5x112 with a 66.56mm hub bore. That covers the CLE 300 4MATIC, CLE 450 4MATIC, and the AMG CLE 53 Coupe across the 2024 and up C236 generation. Lug fastener is M14x1.5, lug bolt style. The CLE replaces the prior C-Class Coupe / Cabriolet and the E-Class Coupe / Cabriolet under a consolidated nameplate, but the bolt math stays the same as the broader Mercedes-Benz lineup.

The 5x112 / 66.56mm pattern is the universal modern Mercedes-Benz spec, shared with the C-Class, E-Class, S-Class, CLA, GLC, GLE, and GLS. 5x112 is NOT the same as 5x114.3 used on most Japanese cars. The two patterns sit roughly 2mm apart and are not interchangeable. Compare across the rest of the Mercedes-Benz lineup at our Mercedes-Benz wheels and rims hub, or check the prior coupe and cabriolet platforms at /wheels/mercedes-benz/c-class and /wheels/mercedes-benz/e-class.

Why CLE Trim And Stagger Behavior Determine Wheel Fit

Both CLE trims run a staggered factory layout across the 2024 and up lineup. The CLE 300 4MATIC and CLE 450 4MATIC (the non-AMG 4MATIC trims) run a mild stagger that matches the all wheel drive layout's rearward power bias on a coupe / convertible body. The AMG CLE 53 Coupe runs a wider stagger to fill the AMG fender flares and to match the AMG brake package. The AMG CLE 53 carries the larger AMG brake package, with the front brake significantly larger than the rear, which is standard on every high output Mercedes-AMG performance variant. Minimum aftermarket diameter on the CLE 300 / 450 4MATIC is 19 inch. Minimum on the AMG CLE 53 is also 19 inch, but the AMG can go up to 21 inch where the non-AMG tops at 20 inch, and the AMG rear width opens to 12 inch where the non-AMG tops at 10 inch.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Mercedes-Benz CLE-Class Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the CLE-Class from the 2024 C236 launch forward. For the CLE that means clearance from the wheel to the fender on a low coupe and convertible body, gap between the back of the wheel and the rear suspension on the 4MATIC all wheel drive layout, brake caliper height across the CLE 300 / 450 and the AMG CLE 53 packages, hub bore confirmation on the 66.56mm Mercedes hub, lug bolt seat depth for the M14x1.5 lug bolt, and the turning geometry that constrains the steer angle clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Mercedes-Benz CLE-Class Wheels and Rims FAQ

Get Mercedes-Benz CLE-Class Wheels Right the First Time

Pick your trim above to see wheels and rims that fit. We measure on the CLE across the 2024 and up C236 platform, track the AMG CLE 53 and the CLE 300 / 450 4MATIC on their own rows because the width window and stagger spread differ, and confirm the 5x112 / 66.56mm spec across every variant. Find your fit and start enjoying your build sooner.