Mercury Milan Wheels and Rims

Mercury Milan Aftermarket Wheel Fitment

The Mercury Milan is the mid-size sedan Mercury sold from the 2006 through 2011 model years on the Ford CD3 platform. The Milan is the Mercury badged twin of the first generation Ford Fusion, and the Lincoln Zephyr (later MKZ) is the third sibling on the same chassis. Element Wheels tracks Milan fitment as a single catalog entry covering the full 2006 to 2011 production run. Every Milan runs a 5x114.3 (also called 5x4.5) bolt pattern with a 67.1mm hub bore and M12x1.5 lug studs. Our measured Element aftermarket window runs 16 to 20 inch in diameter and 6.5 to 8.5 inch in width.

Find Your Mercury Milan Year

The Milan kept the same CD3 platform fitment from 2006 through 2011. Same 5x114.3 bolt pattern, same 67.1mm hub bore, same M12x1.5 lugs. Use our Year/Make/Model search below to pull up wheels that fit your specific Milan year.

The Mercury Milan Bolt Pattern

Every Mercury Milan runs a 5x114.3 bolt pattern with a 67.1mm hub bore. The 5x114.3 spec is also called 5x4.5 in imperial form because 114.3mm equals 4.5 inches. Both notations describe the same pattern. The Milan uses M12x1.5 lug studs and accepts a conical seat lug nut. The bolt pattern, hub bore, and lug thread stayed the same across the full 2006 to 2011 production run because Mercury never moved the Milan off the Ford CD3 chassis.

The Milan shares the 5x114.3 / 67.1mm pattern with the first generation Ford Fusion and the Lincoln Zephyr / MKZ of the same era because all three are the same CD3 platform sedan in different brand trim. Wheels are largely cross-shoppable between the Milan and the Fusion, with factory wheel diameter and brake clearance being the deciding variables. Compare across the rest of the Mercury lineup at our Mercury wheels and rims hub.

What Changed Across Mercury Milan Production

Mercury built the Milan across two visual phases on the same CD3 chassis. The 2006 to 2009 original body launched as Mercury's entry in the new mid-size sedan segment, running factory 16 and 17 inch wheels on most trims. The 2010 to 2011 refresh updated the front fascia, the interior, and the trim packages, and a 18 inch factory wheel became available on the higher trims. The bolt pattern, hub bore, lug thread, and offset window stayed the same across both phases, which is why our catalog tracks the full 2006 to 2011 Milan run as a single fitment entry.

The Milan is a unibody mid-size sedan with front wheel drive standard and all wheel drive available on certain trims. Drivetrain does not change the bolt pattern, the hub bore, or the offset window on the Milan. Front wheel drive and all wheel drive Milans use the same wheel fitment. The Milan's wheel well clearance is good for diameter upgrades up to 20 inch in our catalog, with 18 and 19 inch being the most popular aftermarket sizes. The limiting factors on Milan fitment are factory tire diameter, brake caliper depth, and the offset window the CD3 platform allows.

How We Confirm Fitment on Mercury Milan Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Mercury Milan. For the Milan that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension on the CD3 unibody, brake caliper height, hub protrusion, and lug seat depth. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Mercury Milan Wheels and Rims FAQ

Get Mercury Milan Wheels Right the First Time

Pick your Milan year above to see wheels and rims that fit. We measure on the CD3 Milan platform directly. Find your fit and start enjoying your build sooner.