Mitsubishi Raider Wheels and Rims

Mitsubishi Raider Aftermarket Wheel Fitment

The Mitsubishi Raider is the mid-size pickup Mitsubishi sold in the U.S. from 2006 through 2009. The Raider is the Mitsubishi badged version of the third generation Dodge Dakota. Same chassis, same frame, same drivetrain options, same wheel interface, built at the Dakota plant in Warren, Michigan. Element Wheels measures fitment on the Raider directly, and the spec mirrors the 2005-2010 Dakota: 5x139.7 bolt pattern, 77.8mm hub bore, M12x1.5 lug thread, 5 lug. The Raider only sold in the U.S. for 4 model years before Mitsubishi pulled out of the U.S. truck segment, so this is a closed historical range. Trim levels (LS, DuroCross, XLS) all share the same wheel interface. Pick the year range card below and we will show you wheels and rims sized for the right pattern.

Find Your Mitsubishi Raider

One row covers the entire U.S. Raider production. Same wheel interface across all trims (LS, DuroCross, XLS) and all 4 model years.

The Mitsubishi Raider Bolt Pattern

Every U.S. Mitsubishi Raider (2006-2009) runs 5x139.7 with 5 lug nuts, a 77.8mm hub bore, and M12x1.5 lug thread. 5x139.7 is also written as 5x5.5 in imperial because 139.7mm equals 5.5 inches exactly. Same pattern, two naming conventions. The Raider shares this exact wheel interface with the 2005-2010 Dodge Dakota because the two trucks are the same vehicle with different badges, and the Dakota Gen 3 moved onto a shared chassis with the Dodge Ram 1500 of the same era. The 5x5.5 pattern is the standard half-ton truck pattern.

Important distinction: 5x139.7 is NOT the same as 5x114.3 (the mainstream Mitsubishi car pattern) and is NOT the same as 5x115 (the Dodge Charger / Challenger car pattern). All three patterns share a 5 lug count but the lug circle diameters are completely different and the wheels are not interchangeable. The Raider is on the truck class 5x139.7 pattern specifically. Compare across the rest of the Mitsubishi lineup at our Mitsubishi wheels and rims hub. The Dakota wheel options for the same chassis are at our Dodge Dakota wheels and rims hub.

Trim Differences Across the Mitsubishi Raider

The Raider was offered in three U.S. trim levels: LS (entry, rear wheel drive standard), DuroCross (off road oriented, raised ride height, fender flares, standard 4WD on most years), and XLS (top trim, available with 4WD). All three trims share the same 5x139.7 / 77.8mm wheel interface. The DuroCross runs slightly more aggressive factory tire and slightly more raised ride height than the LS and XLS, which gives it the most fender clearance for aftermarket fitments. The Raider was offered as an extended cab and a crew cab. No regular cab in the U.S. market. Body style does not change the wheel interface.

Raider customers buy custom wheels for looks first and for getting wider stance in the fender second. The Raider chassis is the same as the Dakota Gen 3, so the aftermarket window is consistent with what we measure on the Dakota. Square fitment is standard. Most Raider builds go to 17 to 22 inch diameter with 7 to 9.5 inch widths. The wider widths typically pair with off road tire packages on the DuroCross. Brake size is standard across every Raider trim (no factory Brembo or oversized rotor option), so the limiting factor on a Raider aftermarket build is the fender and the offset, not caliper clearance.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Mitsubishi Raider Wheels

Element Wheels measures fitment on the Raider directly across all three trims and across both 2WD and 4WD drivetrains. For the Raider that means hub bore confirmation at 77.8mm, clearance from the wheel to the fender on a mid-size truck chassis, gap between the back of the wheel and the upper control arm at full droop, brake caliper height at the standard Dakota-derived brake spec, lug seat depth, and lug thread confirmation at M12x1.5. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. The Raider and the Dakota of the same model years share a chassis, so the measurement work cross-references between the two trucks. We don't pull these from manufacturer spec sheets the way most retailers do.

Mitsubishi Raider Wheels and Rims FAQ

Get Mitsubishi Raider Wheels Right the First Time

Pick the 2006-2009 row above to see wheels and rims that fit. We measure on the Raider chassis directly and cross-reference with the 2005-2010 Dodge Dakota. Find your fit and start enjoying your build sooner.