Nissan Rogue Wheels and Rims

Nissan Rogue Aftermarket Wheel Fitment

The Nissan Rogue is Nissan's compact crossover, in continuous production since 2008 and one of the highest-volume vehicles we sell wheels for. Element Wheels measures the Rogue across every generation, from the S35 (2008-2013) through the T32 (2014-2020) and the current T33 (2021 and up), plus the 2017-2023 Rogue Sport that shared the lineup as a smaller-footprint sibling. The bolt pattern, hub bore, and thread pitch are identical across all three Rogue generations and the Rogue Sport: 5x114.3 (also called 5x4.5) with a 66.1mm hub bore and 12x1.25 thread. What changes between generations is the wheel diameter and width window, the FWD or AWD strut geometry, and the brake clearance. Pick your generation below for the fitment specs.

Find Your Nissan Rogue Generation

Pick your year range to see wheels and rims that fit your specific Rogue. Bolt pattern and hub bore are identical across every Rogue and Rogue Sport (5x114.3 / 66.1mm), so the differences between leaves are about wheel diameter cap, fender clearance, and the factory wheel step.

The Nissan Rogue Bolt Pattern

Every Nissan Rogue in our catalog uses 5x114.3 with a 66.1mm hub bore. That covers the S35 (2008-2013), T32 (2014-2020), the current T33 (2021 and up), and the 2017-2023 Rogue Sport. Five lugs, 114.3mm bolt circle, 66.1mm hub bore. The thread pitch is 12x1.25 across every Rogue generation (Nissan / Infiniti standard, narrower than the 12x1.5 used on most Toyota and Honda passenger cars). 114.3mm equals 4.5 inches exactly, which is where the 5x4.5 imperial nickname comes from.

One detail that catches buyers: 5x114.3 is NOT the same as 5x115 used on some American sedans like the Chrysler 300 and the Dodge Charger LX. The two patterns sit only 0.7mm apart and they do not bolt across; the studs will not line up at that spacing. The 5x4.5 imperial nickname refers specifically to 5x114.3. 5x114.3 is the most common 5-lug Japanese bolt pattern, used across the Nissan, Honda, Toyota, Mazda, and Mitsubishi lineups. Within the Rogue line a wheel will bolt across generations in terms of stud pattern, but the offset, the brake clearance, and the strut geometry differ enough that we measure each generation separately. Compare across the rest of the Nissan lineup at our Nissan wheels and rims hub.

Why the Rogue Generation Determines Wheel Fit

The Rogue is a unibody compact crossover that has run the same 5x114.3 / 66.1mm spec from launch in 2008 through the current T33, but the platforms underneath have grown considerably. The S35 (2008-2013) opened the Rogue lineup with a 16 to 20 inch diameter window and a tighter 6 to 8.5 inch width window. The T32 (2014-2020) widened the wheel window to 6 to 9 inch and lifted the diameter ceiling to 22 inch. The current T33 (2021 and up) carries that same 16 to 22 inch diameter window with the 6 to 9 inch width window. Each generation has its own measured offset range even though the wheels bolt across in stud pattern. The Rogue is square front and rear across every generation; there is no measured rear-staggered window in the lineup. Front-wheel-drive and all-wheel-drive Rogues share the same bolt pattern, hub bore, diameter, width, and offset window.

The 2017-2023 Rogue Sport (sold as the Qashqai outside North America) is a separate smaller-footprint crossover that overlapped the T32 Rogue in showrooms. It shares the Rogue's 5x114.3 / 66.1mm bolt pattern and hub bore but runs a tighter aftermarket window: 16 to 20 inch diameter and 6.5 to 8.5 inch width. Production ended after the 2022 model year in the US and the 2023 model year in Canada; we continue to measure and stock wheels for the Rogue Sport for the installed base.

How We Confirm Fitment on Nissan Rogue Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every Rogue generation from the S35 through the current T33 and the Rogue Sport sibling. For the Rogue that means clearance from the wheel to the fender, gap between the back of the wheel and the strut, brake caliper height, hub bore confirmation on the 66.1mm Nissan crossover hub, lug seat depth on the M12x1.25 thread, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what lets us call the diameter ceiling separately on the S35 vs the T32 and T33, and what lets us flag the Rogue Sport as a tighter-window variant rather than a Rogue trim. Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Nissan Rogue Wheels and Rims FAQ

Get Nissan Rogue Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Rogue platform across every generation from the S35 through the current T33, treat the Rogue Sport as its own vehicle with its own tighter window, and tune the offset window per chassis. Find your fit and start enjoying your build sooner.