Saturn SC-Series Wheels and Rims

Saturn SC-Series Aftermarket Wheel Fitment

The Saturn SC-Series is Saturn's original small coupe, the two-door body style in the S-Series lineup that ran from 1991 through 2002. Element Wheels measures fitment on the 1991-2002 SC across the SC1 and SC2 trims and both the original two-door body and the 1999-2002 three-door body. Every SC in that range shares the same hub: 4x100 bolt pattern, 57.1mm hub bore, M12x1.5 lug thread, 4 lugs. The SC diameter window we measure runs 15 to 18 inch. Pick the catalog row below.

Find Your Saturn SC-Series Generation

The 1991-2002 SC-Series is Saturn's original coupe. The first generation SC ran 1991-1996. The second generation SC1 and SC2 ran 1997-2002, and the 1999-2002 SC added a rear-hinged third door on the driver side (the Saturn three-door coupe body that predated the Ion Quad Coupe). Every SC across both generations and both body styles shares the same 4x100 4-lug hub.

The Saturn SC-Series Bolt Pattern

The 1991-2002 SC uses a 4x100 bolt pattern with a 57.1mm hub bore and an M12x1.5 lug thread on a 4-lug hub. 4x100 is the dominant small front wheel drive pattern of the 1990s and early 2000s compact category. The SC1 sohc trim, the SC2 dohc sport trim, the 1991-1996 first generation body, and the 1997-2002 second generation body (including the 1999-2002 three-door body with the rear-hinged driver side door) all share the same 4x100 4-lug hub.

Important distinction: 4x100 is a different bolt pattern from 4x114.3 and the two are not interchangeable. The two sit about 14.3mm apart on the hub circle and a 4x114.3 wheel will not start on a 4x100 hub. Also, the later Saturn Ion Red Line (2005-2007) and the Saturn Astra (2008-2009) moved up to a 5-lug 5x110 hub, so SC wheels do not cross over to those Saturns. The SC stays 4-lug 4x100 across its entire 1991-2002 production. Confirm any wheel listing says 4x100 before ordering. Compare across the rest of the Saturn lineup at our Saturn wheels and rims hub.

SC-Series Trim Differences and Measured Fitment

The SC-Series keeps the same hub geometry across every trim and model year. SC1, SC2, first generation (1991-1996), and second generation (1997-2002) all share the same 4x100 bolt pattern, 57.1mm hub bore, M12x1.5 lug thread, and brake package on the catalog. The SC2 carries the larger 1.9L DOHC engine over the SC1's 1.9L SOHC and ships on the slightly larger factory wheel, but the fitment geometry stays the same. A wheel that fits a 1998 SC1 also fits a 1998 SC2. The 1999-2002 three-door coupe shares the same hub spec as the standard two-door SC of the same year.

The diameter window we measure runs 15 inch on the low end up to 18 inch on the show-build end. 15 to 16 inch is the most common SC aftermarket choice and matches the factory size on most SC1 and SC2 trims. 17 inch is the popular upsize that fills the fender without overwhelming the SC's small body. 18 inch is the show-build top of the range. Above 18 inch the tire sidewall thins sharply on the SC's compact body and the suspension geometry was never tuned to absorb the bigger wheel, so 18 inch is our top recommendation.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Saturn SC-Series Wheels

Element Wheels measures fitment on the SC directly, across SC1 and SC2 and both the two-door and three-door bodies. For the SC that means hub bore confirmation at 57.1mm, clearance from the wheel to the fender on the SC's compact coupe body, gap between the back of the wheel and the strut on this front wheel drive layout, brake caliper height at the factory spec, lug seat depth on the 4-lug pattern, and lug thread confirmation at M12x1.5. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do. The SC is the Saturn coupe in the S-Series family with the SL sedan and SW wagon, so a wheel proven on a Saturn S-Series sedan or wagon gives us a starting point on the SC, but the coupe body has its own fender geometry and we verify each body on its own.

Saturn SC-Series Wheels and Rims FAQ

Get Saturn SC-Series Wheels Right the First Time

Pick the catalog row above to see wheels and rims that fit. We measure on the 1991-2002 SC across SC1 and SC2 and both the two-door and 1999-2002 three-door bodies. The 4x100 / 57.1mm hub spec stays consistent across the entire production run. Find your fit and start enjoying your build sooner.