Suzuki Grand Vitara Wheels and Rims

Suzuki Grand Vitara Aftermarket Wheel Fitment

This is the parent hub for the Suzuki Grand Vitara sold in the US between 1999 and 2013. Element Wheels measures fitment across both generations of the Grand Vitara: the 1999-2005 body-on-frame SUV that shared a platform with the Suzuki Vitara and Sidekick, and the 2006-2013 unibody crossover that moved to a car-based architecture. Both bolt pattern AND hub bore changed at the 2005-2006 cutover. The earlier truck-based Grand Vitara ran 5x139.7 with a 108.1mm hub bore. The later unibody Grand Vitara ran 5x114.3 with a 60.1mm hub bore. A wheel from a 1999-2005 Grand Vitara will not bolt onto a 2006-2013 Grand Vitara. Pick your generation below for the fitment specs that apply to your specific Grand Vitara.

Both generations were sold with two-wheel-drive and four-wheel-drive variants. The fitment box (bolt pattern, hub bore, diameter range, width range, offset window) does not change with drivetrain on the Grand Vitara, so the same wheel that fits a 2WD Grand Vitara fits the 4WD of the same year. Compare across the rest of the Suzuki lineup at our Suzuki wheels and rims hub.

Find Your Suzuki Grand Vitara Generation

Pick your year range to see wheels and rims that fit your specific Grand Vitara. The bolt pattern shift at the 2005-2006 cutover is the most important fitment fact on this hub. Both generations run matched front-rear width with no staggered option from the factory.

The Suzuki Grand Vitara Bolt Pattern, and the 2006 Switch

The 1999-2005 Grand Vitara was a body-on-frame SUV that ran 5x139.7 with a 108.1mm hub bore. 5x139.7 is also written as 5x5.5 in imperial. That nickname refers ONLY to 5x139.7 (139.7mm = 5.5 inches) and is correct as a synonym for this generation. The 108.1mm hub bore is the same large hub used on Suzuki Vitara and Sidekick of the same era. The factory studs use 12x1.25 thread pitch with a tapered lug seat.

The 2006-2013 Grand Vitara was redesigned as a unibody crossover and the fitment box changed completely. Bolt pattern moved to 5x114.3 with a 60.1mm hub bore. 5x114.3 is also written as 5x4.5 in imperial (114.3mm = 4.5 inches); the 5x4.5 nickname applies to 5x114.3 ONLY and not to 5x115. A wheel listed for 5x115 (Chrysler 300, Dodge Charger LX) will NOT bolt onto a Grand Vitara of either generation even though the millimeter difference looks small, and a 5x114.3 wheel will not fit the 1999-2005 Grand Vitara. Treat the 2005 to 2006 transition as a full reset: bolt pattern, hub bore, and the lug seat geometry all change.

Why Grand Vitaras Run Square Fitment

Both generations of the Grand Vitara ran matched front-rear wheel size from the factory. The 1999-2005 body-on-frame SUV used a part-time four-wheel-drive system that requires equal tire circumference at all four corners when the front axle is engaged. The 2006-2013 unibody crossover used a full-time all-wheel-drive system that also needs matched circumference at all four corners to keep the center differential and viscous coupling happy. Square fitment is the engineering constraint on this car, not a styling choice. Element catalog rows for both generations reflect this: matched front-rear width and matched front-rear offset across the entire run.

The brake package on the Grand Vitara is matched front to rear across both generations. There is no front-larger-than-rear split on this car. The aftermarket diameter window stays open from 16 inch through 20 inch on both generations, with the 17-18 inch range running as the buying default for owners going up from the factory size. We measure each generation directly at our fitment facility in Chandler, Arizona, which is what produced the publishable factory and aftermarket windows below.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Suzuki Grand Vitara Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both generations of the Grand Vitara. For the Grand Vitara that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation (108.1mm on the 1999-2005, 60.1mm on the 2006-2013), lug seat geometry, and confirmation that the wheel and tire match circumference front to rear so the part-time 4WD or full-time AWD system stays happy. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Suzuki Grand Vitara Wheels and Rims FAQ

Get Suzuki Grand Vitara Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Grand Vitara across both generations, track the 2006 unibody transition, and confirm square fitment as the engineering constraint for both 4WD and AWD. Find your fit and start enjoying your build sooner.