Toyota Avalon Wheels and Rims

Toyota Avalon Aftermarket Wheel Fitment

The Toyota Avalon was Toyota's flagship full-size sedan in the North American market for nearly three decades. Production ran from the 1st generation XX10 (1995-1999) through the 5th generation XX50 (2019-2022). Toyota ended Avalon production in the US after the 2022 model year, so this is a closed historical range. Every Avalon generation, from the original XX10 through the final XX50, runs a 5x114.3 bolt pattern with a 60.1mm hub bore. The aftermarket diameter window opens up over the platform's lifetime, from a 15-20 inch range on the 1st gen to a 17-20 inch range on the modern XX40 and XX50. Element Wheels measures fitment on all five Avalon generations and tracks the early-2000s facelift split inside the XX30. Find your year range below and the wheel and rim recommendations follow.

Find Your Toyota Avalon Generation

Pick your year range to see wheels and rims that fit your specific Avalon. Bolt pattern is 5x114.3 with a 60.1mm hub bore on every Avalon from the XX10 to the final XX50. What changes by generation is the diameter window, the width window, and the offset window.

The Toyota Avalon Bolt Pattern

Every Toyota Avalon ever built for the North American market runs a 5x114.3 bolt pattern with a 60.1mm hub bore. That covers the 1st gen XX10 (1995-1999), the 2nd gen XX20 (2000-2004), the 3rd gen XX30 (2005-2012), the 4th gen XX40 (2013-2018), and the 5th gen XX50 (2019-2022). Lug count is five, thread pitch is M12x1.5. The pattern is also written as 5x4.5 in imperial; 5x4.5 refers ONLY to 5x114.3 (114.3mm = 4.5 inches). It does NOT refer to 5x115, which is the bolt pattern used on the Chrysler 300, Dodge Charger LX, and similar American sedans. The two patterns sit about 0.7mm apart and are not interchangeable. A 5x115 wheel will not bolt onto an Avalon.

The 5x114.3 / 60.1mm spec is the Toyota family hub. It is the same bolt pattern and hub bore Toyota uses on the Camry, Highlander, RAV4, and Sienna. Wheels listed for any 5x114.3 / 60.1mm Toyota physically bolt to the Avalon on hub geometry. What changes between platforms is the offset window, the brake clearance, and the fender room, so a wheel built for a Camry will not always sit correctly on an Avalon even though the bolt math matches. We measure each platform separately. Compare across the rest of the Toyota lineup at our Toyota wheels and rims hub.

Avalon Generation Differences That Matter for Wheel Fitment

The bolt pattern is constant, but the fitment window grows across the platform's lifetime. The 1st gen XX10 (1995-1999) ran from 15 to 20 inch diameters with a 5.5-8.5 inch width window. The 4th gen XX40 (2013-2018) and 5th gen XX50 (2019-2022) opened the window to 17-20 inch diameters at 7.5-9 inch widths to match the more aggressive factory wheels Toyota fitted on the modern Avalon Touring and Limited trims. The Avalon Hybrid (offered on the XX40 and XX50) shares the same bolt pattern, hub bore, brake package, and fitment window as the gasoline Avalon of the same generation and trim. The hybrid powertrain does not change wheel fitment. A wheel that fits a gasoline XX50 Limited fits a hybrid XX50 Limited.

The Avalon TRD, offered on the XX50 from 2020 through 2022, runs a sport package with a lower stance and a 19 inch factory wheel. Bolt pattern and hub bore are identical to the rest of the XX50 range, but the TRD's lowered ride height and sport-tuned suspension narrow the fender clearance window slightly. We measure the TRD separately when the fender clearance window narrows.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Toyota Avalon Wheels

Element Wheels measures fitment on the Avalon directly, across every generation back to the XX10. For the Avalon that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation to the 60.1mm Toyota family hub, lug seat geometry, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Toyota Avalon Wheels and Rims FAQ

Get Toyota Avalon Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Avalon platform across every generation from the XX10 to the final XX50, including the XX40 and XX50 Hybrid and the XX50 TRD. Find your fit and start enjoying your build sooner.