Toyota Camry Solara Wheels and Rims

Toyota Camry Solara Aftermarket Wheel Fitment

The Toyota Camry Solara is the coupe and convertible body style of the Camry, built on the same chassis as the sedan with different sheet metal. The Solara ran for two generations only. The 1st gen (1999-2003) is built on the XV20 Camry chassis, and the 2nd gen (2004-2008) is built on the XV30 Camry chassis. Toyota discontinued the Solara after the 2008 model year with no direct successor. The bolt pattern is constant across both generations: 5x114.3 with a 60.1mm hub bore, the same hub spec as the same-year Camry sedan. Element Wheels measures fitment on both Solara generations, treats the coupe and convertible body styles as one fitment row, and tracks the suspension and brake differences that come with the sportier Solara trim. Pick your generation below for the wheel and rim recommendations that apply to your specific car.

Find Your Toyota Camry Solara Generation

Pick your generation to see wheels and rims that fit your specific Solara. The bolt pattern is 5x114.3 with a 60.1mm hub bore on both Solara generations. The fitment window expands slightly between the 1st gen (1999-2003, smaller factory diameters) and the 2nd gen (2004-2008, wider aftermarket width window).

The Toyota Camry Solara Bolt Pattern

Every Toyota Camry Solara built across the platform's run uses 5x114.3 with a 60.1mm hub bore. That covers the 1st gen (1999-2003) and the 2nd gen (2004-2008), both coupe and convertible body styles. The pattern is also written as 5x4.5 in imperial; 5x4.5 refers ONLY to 5x114.3 (114.3mm = 4.5 inches). It does NOT refer to 5x115, which is a different bolt pattern used on Chrysler 300, Dodge Charger LX, and similar American sedans. The two patterns sit about 0.7mm apart and are not interchangeable. A 5x115 wheel will not bolt onto a Solara.

The Solara shares its 5x114.3 / 60.1mm spec with the same-generation Camry sedan because the Solara is the Camry coupe and convertible. 1st gen Solara hubs match the XV20 Camry (1997-2001 sedan), and 2nd gen Solara hubs match the XV30 Camry (2002-2006 sedan). Wheels listed for those Camry sedans physically bolt to the corresponding Solara on hub geometry. What can change between the sedan and the Solara coupe or convertible of the same year is the suspension tuning (the Solara SLE and SE Sport ran sportier dampers) and the front brake size on the V6 trims. The aftermarket diameter and width windows track close to the sedan, but we measure the Solara as its own row because the body lines and the convertible top mechanism change the fender clearance picture slightly. Compare across the rest of the Toyota lineup at our Toyota wheels and rims hub, or jump to the Camry sedan hub.

1st Gen vs 2nd Gen Solara Wheel Fitment

Both Solara generations use 5x114.3 / 60.1mm, but the fitment window steps up slightly between them. The 1st gen Solara (1999-2003, XV20-based) was a softer, more luxury-oriented coupe, and the factory diameters topped at 16 inch. Most 1st gen aftermarket builds run 16, 17, or 18 inch in 6 to 8 inch width with offset in the factory window. The 2nd gen Solara (2004-2008, XV30-based) is the unibody, Camry-derived redesign that pushed the styling toward a true sport coupe and convertible, and the factory diameters topped at 17 inch. Most 2nd gen aftermarket builds run 17, 18, 19, or 20 inch in 6 to 8.5 inch width.

Both generations were front-wheel-drive, never all-wheel-drive or rear-wheel-drive. Both ran square (same width front and rear) from the factory. SE 4-cylinder and SLE V6 trims share the same bolt pattern, hub bore, and brake package per our catalog data; engine choice doesn't change the wheel fitment math. The convertible body adds a few extra pounds of curb weight from the top mechanism and the reinforced frame, so we confirm tire load index on convertible builds.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Toyota Camry Solara Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both Solara generations back to the 1999 1st gen. For the Solara that means clearance from the wheel to the fender (the coupe body has tighter front-fender clearance than the sedan), gap between the back of the wheel and the suspension, brake caliper height (especially on the SLE V6), hub bore confirmation, lug seat geometry, and turning clearance at full lock. On convertible builds we confirm tire load index meets the factory minimum because the rag-top adds curb weight. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Toyota Camry Solara Wheels and Rims FAQ

Get Toyota Camry Solara Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on both Solara generations and track the coupe and convertible body styles. Find your fit and start enjoying your build sooner.