Toyota Mirai Wheels and Rims

Toyota Mirai Aftermarket Wheel Fitment

The Toyota Mirai is Toyota's hydrogen fuel cell sedan, sold in California volume in the US market and offered through select Lexus and Toyota dealers in states with hydrogen refueling infrastructure. The Mirai launched globally in 2014 and reached the US for the 2016 model year. It has run for two generations on two different platforms. The 1st gen Mirai (2016-2020) is a smaller front wheel drive sedan on a dedicated fuel cell vehicle platform, with a 5x114.3 bolt pattern and a 60.1mm hub bore. The 2nd gen Mirai (2021-2024) is a larger rear wheel drive sedan on Toyota's TNGA-L architecture, the same chassis family as the Lexus LS, with a 5x120 bolt pattern and a 60.1mm hub bore. The bolt pattern changes between generations, so generation selection matters more on the Mirai than on most Toyota cars. Both gens use M12x1.5 lug studs. Element Wheels measures both Mirai generations directly. Pick your generation below for the fitment specs that apply to your specific Mirai.

Find Your Toyota Mirai Generation

Pick your generation to see wheels and rims that fit your specific Mirai. The bolt pattern is different between the two generations. The 1st gen (2016-2020) is 5x114.3, the same pattern used across the Toyota Camry, RAV4, and Sienna family. The 2nd gen (2021-2024) is 5x120, a different pattern that reflects the TNGA-L architecture the 2nd gen shares with the Lexus LS. Centerbore is 60.1mm on both.

The Toyota Mirai Bolt Pattern by Generation

The 1st gen Mirai (2016-2020) uses 5x114.3 with a 60.1mm hub bore. The pattern is also written as 5x4.5 in imperial because 114.3mm equals 4.5 inches exactly. 5x4.5 refers ONLY to 5x114.3. It does NOT refer to 5x115, which is a different bolt pattern used on Chrysler 300, Dodge Charger LX, and similar American sedans. The two patterns sit about 0.7mm apart on the bolt circle and are not interchangeable. A 5x115 wheel will not bolt onto a 1st gen Mirai. The 1st gen shares 5x114.3 / 60.1mm with the broader Toyota family including the Camry, RAV4, Sienna, and Avalon, so the bolt math and hub bore match. Width and offset are platform-specific to the 1st gen Mirai's FCV chassis and still measured separately.

The 2nd gen Mirai (2021-2024) uses 5x120 with a 60.1mm hub bore. 5x120 is a different bolt pattern, most commonly seen on BMW models. The change reflects the new platform under the 2nd gen: TNGA-L, the rear biased architecture Toyota uses for the Lexus LS family. The 2nd gen Mirai is rear wheel drive (the 1st gen was front wheel drive), and the platform change carried a bolt pattern change with it. The two Mirai generations do NOT share wheels even though both wear the same nameplate. A 1st gen wheel will not bolt to a 2nd gen, and a 2nd gen wheel will not bolt to a 1st gen. Confirm your model year before ordering.

Both Mirai generations use M12x1.5 lug studs. The centerbore is 60.1mm on both. Compare across the rest of the Toyota lineup at our Toyota wheels and rims hub.

Why the 2nd Gen Mirai Runs 5x120

Toyota redesigned the Mirai for the 2021 model year as a larger, more premium rear wheel drive sedan on TNGA-L, the same architecture family that sits under the Lexus LS. The redesign repositioned the Mirai upmarket. Longer wheelbase, rear drive layout, bigger wheels from the factory. The 5x120 bolt pattern came with the platform. 5x120 is not a typical Toyota family pattern, but it matches the segment the 2nd gen Mirai occupies, where larger luxury sedans with rear drive routinely run 5x120 from a variety of manufacturers. Within the catalog the 2nd gen Mirai's 5x120 / 60.1mm spec is distinct from every other Toyota model in the lineup.

Customers shop wheels for the 2nd gen Mirai for two main reasons. Looks first. The redesign delivered a sleeker sedan profile and the factory wheels are large diameter to begin with (19 or 20 inch depending on trim), so aftermarket choices are about style, finish, and a tighter or more aggressive stance rather than a major diameter jump. Performance second. The hydrogen fuel cell stack pushes torque to the rear wheels through an electric motor, and unsprung weight at each corner reduces directly into responsiveness. Lighter aftermarket wheels make the most of the electric drive characteristics.

The 1st gen Mirai is a different car. Front wheel drive, smaller diameter wheels from the factory (17 inch base), narrower body, dedicated FCV chassis. The 1st gen aftermarket window stays close to factory diameter (17-19 inch range) to preserve the smaller sedan's ride and handling balance.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Toyota Mirai Wheels

Element Wheels measures both Mirai generations directly. For the Mirai that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation, lug seat geometry, lug thread confirmation, and turning clearance at full lock. We treat the 1st gen and the 2nd gen as separate platforms because they share no chassis, no drivetrain layout, and no bolt pattern. The 1st gen sits on a dedicated front wheel drive FCV platform. The 2nd gen sits on TNGA-L with rear drive. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Toyota Mirai Wheels and Rims FAQ

Get Toyota Mirai Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure both Mirai generations directly, with attention to the bolt pattern split (5x114.3 on 1st gen, 5x120 on 2nd gen) that makes generation selection critical. Find your fit and start enjoying your build sooner.