Toyota Venza Wheels and Rims

Toyota Venza Aftermarket Wheel Fitment

The Toyota Venza is a midsize crossover Toyota built in two distinct generations separated by a six-year production gap. The first generation ran 2009 through 2015, sharing its platform with the contemporary Camry and Lexus ES, with both four cylinder and V6 engine options and a choice of front-wheel-drive or all-wheel-drive. Toyota wound it down after 2015 and brought the nameplate back for 2021 on a completely different chassis. The second generation (2021-2024) is built on the same TNGA-K platform as the current RAV4 Hybrid, hybrid powertrain only and AWD standard. The bolt pattern stays constant across both generations. Every Venza, first or second generation, runs 5x114.3 with a 60.1mm hub bore. Element Wheels measures both generations directly. Pick your generation below for the fitment specs that apply to your specific car.

Find Your Toyota Venza Generation

Toyota built two generations of the Venza separated by a six-year gap. The first generation (2009-2015) is the Camry-based crossover assembled at Toyota Motor Manufacturing Kentucky. The second generation (2021-2024) is the RAV4 Hybrid-based crossover, sold globally as the Toyota Harrier in the Japan market. The bolt pattern is 5x114.3 with a 60.1mm hub bore on every Venza of either generation.

The Toyota Venza Bolt Pattern

Every Toyota Venza built since launch uses 5x114.3 with a 60.1mm hub bore. That covers the first generation (2009-2015) and the second generation (2021-2024). The pattern is also written as 5x4.5 in imperial because 114.3mm equals 4.5 inches exactly. 5x4.5 refers ONLY to 5x114.3. It does NOT refer to 5x115, which is a different bolt pattern used on Chrysler 300, Dodge Charger LX, and similar American sedans. The two patterns sit about 0.7mm apart on the bolt circle and are not interchangeable. A 5x115 wheel will not bolt onto a Venza of either generation.

The 5x114.3 / 60.1mm combination is the Toyota family hub spec. It is shared with the Camry, RAV4, Sienna, Highlander, Avalon, and most modern Toyota cars and crossovers, plus the related Lexus ES on the first generation Venza's K platform. Wheels listed for any 5x114.3 / 60.1mm Toyota physically bolt to a Venza at the hub level. What changes between platforms is the offset window, the brake clearance, and the fender room. A wheel built for a Camry sedan will not always sit correctly on the taller Venza body, and a wheel built for a RAV4 won't always carry the visual weight of the wider Venza body. We measure each platform separately. Compare across the rest of the Toyota lineup at our Toyota wheels and rims hub.

Two Generations, Two Different Platforms, Same Bolt Pattern

The first generation Venza (2009-2015) is a midsize wagon-style crossover built on the Toyota K platform alongside the 2007-2011 Camry and the Lexus ES of the same era. It launched with both a 2.7L four cylinder and a 3.5L V6, available in front-wheel-drive and all-wheel-drive configurations. The Venza Gen 1 was assembled at Toyota Motor Manufacturing Kentucky in Georgetown. Factory wheels ranged 19 inch on the four cylinder trims to 20 inch on the V6 trims. Our measured aftermarket window goes from 19 to 22 inch with widths in the 8 to 9.5 inch range.

Toyota discontinued the Venza after 2015 and brought the nameplate back for the 2021 model year on a completely different chassis. The second generation Venza (2021-2024) is a rebadged Toyota Harrier (Japan-market name) built on the TNGA-K platform alongside the RAV4 Hybrid. It is hybrid only (2.5L four cylinder paired with electric motors) with all-wheel-drive standard. The Gen 2 Venza is slightly smaller than the Gen 1 in overall footprint, and the factory wheel range starts at 18 inch on the LE trim and climbs to 19 inch on the Limited trim. Our measured aftermarket window runs 18 to 22 inch with widths in the 7.5 to 9 inch range. Production ended after the 2024 model year. The bolt pattern stays 5x114.3 / 60.1mm across both generations, so a wheel that fits one Venza fits the other at the hub level. Width, offset, and brake clearance change between the generations because the platforms are different.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Toyota Venza Wheels

Element Wheels measures the Venza across both generations. For the Venza that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation, lug seat geometry, and turning clearance at full lock. We measure the Gen 1 Camry-based Venza and the Gen 2 RAV4 Hybrid-based Venza separately because the platforms are different even though the bolt pattern matches. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Toyota Venza Wheels and Rims FAQ

Get Toyota Venza Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure the Venza across both generations, the Camry-based Gen 1 and the RAV4 Hybrid-based Gen 2, so the offset window and brake clearance match your platform. Find your fit and start enjoying your build sooner.