Volvo C70 Wheels and Rims

Volvo C70 Aftermarket Wheel Fitment

The Volvo C70 is Volvo's two-door open-top platform sold across two distinct generations in the US market. The 1st gen C70 on the P80 platform (1999-2005) was sold as a coupe and a soft-top convertible, sharing chassis architecture with the S70 sedan and V70 wagon of the same era. The 2nd gen C70 on the P1 platform (2006-2013) was a clean-sheet redesign as a retractable folding hardtop, built on the Ford C1 architecture that Volvo shared with the S40 2nd gen, V50, and C30 of the same period. Both generations of the C70 use the 5x108 Volvo bolt pattern, but everything else about the lug hardware changes across the platform transition. The P80 C70 uses lug bolts threaded directly into the hub with a 65.1mm hub bore. The P1 C70 uses lug nuts on studs with a 63.4mm hub bore. Every C70 ships square (non-staggered) front to rear with matched brake size on both axles. Find your generation below.

Find Your Volvo C70 Generation

Pick your year range to see wheels and rims that fit your specific C70. Bolt pattern is 5x108 across both generations. Hub bore is 65.1mm on the 1st gen P80 and 63.4mm on the 2nd gen P1. Lug hardware also changes: bolts on the P80, nuts on studs on the P1.

The Volvo C70 Bolt Pattern

Every C70 from 1999 through 2013 runs 5x108 (also expressed as 5x4.25) as its bolt pattern. The pattern stayed consistent across the 1st gen on the P80 platform (1999-2005) and the 2nd gen on the P1 platform (2006-2013). 5x108 is the standard Volvo bolt pattern across the broader Volvo range of that era, including the S60, S80, V70, XC70, S40/V40 2nd gen, V50, and C30. Within the Volvo lineup, wheel cross-shopping by bolt pattern is straightforward as long as the centerbore also matches your C70 hub.

Hub bore is where the C70 splits. The 1st gen P80 C70 (1999-2005) uses a 65.1mm hub bore, shared with the contemporary S70, V70 P80, and S80 1st gen. The 2nd gen P1 C70 (2006-2013) uses a 63.4mm hub bore, shared with the S40 2nd gen, V50, C30, and the modern Volvo lineup that came after. Lug hardware also changes across the generations: the 1st gen P80 uses M12x1.75 lug bolts threaded directly into the hub, while the 2nd gen P1 uses M12x1.5 lug nuts on studs. What 5x108 is NOT: it is not the same as 5x110 (common GM pattern) or 5x112 (common German pattern). A wheel built for those patterns will not bolt to a C70. Compare across the rest of the Volvo lineup at our Volvo wheels and rims hub.

Volvo C70 Trims and Wheel Specs

The 1st gen C70 (P80, 1999-2005) was sold as a two-door coupe early in the run and a soft-top convertible across the full run. Both bodies share the same 5x108 / 65.1mm hub bore spec and M12x1.75 lug bolt hardware. Factory wheel diameter on the 1st gen ran 16 to 17 inch depending on year and trim. The Element aftermarket diameter window opens up to 20 inch.

The 2nd gen C70 (P1, 2006-2013) was a clean-sheet redesign as a retractable folding hardtop coupe-convertible, sharing chassis architecture with the S40 2nd gen, V50, and C30. All trims share the same 5x108 / 63.4mm hub bore spec and M12x1.5 lug nut hardware. Factory wheel diameter on the 2nd gen ran 17 to 18 inch depending on trim. Every C70 ships square (non-staggered) front to rear with matched front and rear brake size across all trims.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Volvo C70 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both C70 generations. For the C70 that means clearance from the wheel to the fender on both axles, gap between the back of the wheel and the suspension (with the retractable hardtop hardware on the 2nd gen factored in), brake caliper height on the front and rear (matched on both C70 generations), hub bore confirmation to the correct 65.1mm or 63.4mm depending on generation, lug hardware verification (bolts on the P80, nuts on the P1), and tire clearance at full lock with the larger 18, 19, and 20 inch options. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do. The C70 is a two-door open-top with a low fender line, and most C70 buyers run 17 or 18 inch wheels for a clean factory-plus look without disrupting the convertible top mechanism on the 2nd gen.

Volvo C70 Wheels and Rims FAQ

Get Volvo C70 Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure both C70 generations directly. The C70 is a two-door open-top with different platforms across the P80 coupe/convertible and the P1 retractable hardtop. Our catalog covers a clean 17 to 18 inch upgrade window on both generations with room to go larger. Find your fit and start enjoying your build sooner.