Volvo S80 Wheels and Rims

Volvo S80 Aftermarket Wheel Fitment

The Volvo S80 was Volvo's flagship luxury sedan from the late 1990s through the mid 2010s, running across two generations before being replaced by the modern S90. Element Wheels tracks the S80 across both generations. The 1st gen S80 on the Volvo P2 platform (1999-2005) ran 5x108 with a 65.1mm hub bore. The 2nd gen S80 on the Volvo P3 platform (2006-2016) kept the 5x108 bolt pattern but stepped the hub bore down to 63.4mm. Both generations use M14x1.5 lug bolts threaded directly into the hub. Every S80 is square (non-staggered) front to rear, with matched brake size on both axles across both generations. Compare across the rest of the Volvo lineup at our Volvo wheels and rims hub.

Find Your Volvo S80 Generation

Pick your year range to see wheels and rims that fit your specific S80. Bolt pattern stays 5x108 across both generations. What changes is the hub bore (65.1mm on the 1st gen P2, 63.4mm on the 2nd gen P3) and the Volvo chassis platform underneath.

The Volvo S80 Bolt Pattern

Every S80 from 1999 through 2016 runs 5x108 (also expressed as 5x4.25) as its bolt pattern. The pattern stayed consistent across the 1st gen on the Volvo P2 platform (1999-2005) and the 2nd gen on the Volvo P3 platform (2006-2016). 5x108 is the standard Volvo bolt pattern across the broader Volvo range of that era, used on the S60, V70, XC70, and the XC90. Within the Volvo lineup, wheel cross-shopping by bolt pattern is straightforward as long as the centerbore also matches your specific S80 hub. All S80 lug hardware is M14x1.5 lug bolts threaded directly into the hub.

The hub bore is the spec to watch when cross-shopping S80 fitment within the Volvo range. The 1st gen S80 (1999-2005) uses a 65.1mm hub bore, the same bore used on the 1st gen Volvo S60 of the same era. The 2nd gen S80 on the P3 platform (2006-2016) steps the hub bore down to 63.4mm, the same bore used on the modern Volvo lineup including the XC60, S60, V60, and the 2nd gen XC90. A 2nd gen S80 wheel with a 63.4mm bore will not seat flush on a 1st gen S80 hub. What 5x108 is NOT: it is not the same as 5x110 (common GM pattern) or 5x112 (common German pattern). A wheel built for those patterns will not bolt to an S80.

Volvo S80 Trims and Wheel Specs

The 1st gen S80 (1999-2005) was sold with the inline-5, the T6 inline-6 turbo, and the 2.9 inline-6 engines. All trims share the same 5x108 / 65.1mm bolt pattern and hub bore. Factory wheel diameter on the 1st gen ran 15 to 17 inch depending on year and trim, with the T6 carrying the larger end of that range. The brake setup on the 1st gen is matched front to rear in size across all trims.

The 2nd gen S80 (2006-2016) on the P3 platform was sold with the inline-6, the V8 (Yamaha-developed, the same V8 used in the 1st gen XC90), the inline-5 T5, and the T6 turbocharged inline-6. All trims share the same 5x108 / 63.4mm bolt pattern and hub bore. The Polestar performance tune was offered on the 2nd gen S80 in some markets but did not change the bolt pattern, hub bore, or the brake package versus the standard T6. Factory wheel diameter on the 2nd gen ran 16 to 18 inch depending on trim. Both S80 generations are square (non-staggered) front to rear, with matched front and rear brake size across all trims.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Volvo S80 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both S80 generations. For the S80 that means clearance from the wheel to the fender on both axles, gap between the back of the wheel and the suspension, brake caliper height on the front and rear (matched on both S80 generations), hub bore confirmation to the 65.1mm 1st gen hub or the 63.4mm 2nd gen hub, lug seat depth on the M14x1.5 bolts, and tire clearance at full lock with the larger 18 inch options. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do. The S80 is a flagship sedan with conservative aftermarket preferences. Most S80 customers run stock-height with 17 or 18 inch wheels for a clean factory-plus look, and our catalog tracks both generations to support that buyer.

Volvo S80 Wheels and Rims FAQ

Get Volvo S80 Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure both S80 generations directly. The S80 was Volvo's flagship sedan and the aftermarket buyer base runs conservative, which is why our catalog covers a clean 17 and 18 inch upgrade window for both generations. Find your fit and start enjoying your build sooner.