Acura ILX Wheels and Rims

Acura ILX Aftermarket Wheel Fitment

The Acura ILX was Acura's entry-level compact luxury sedan, built on the 9th-generation Honda Civic platform and sold from 2013 through 2022. Acura discontinued the ILX after the 2022 model year and revived the Integra nameplate for 2023 on the 11th-generation Civic platform; the modern Integra is effectively the ILX's replacement in the Acura lineup. The ILX itself ran two distinct cars across one generation: the pre-facelift (2013-2018) and the post-facelift refresh (2019-2022) with revised front and rear styling, the A-Spec trim package (from 2016 forward), and a steady mechanical platform underneath. The bolt pattern stays constant across every ILX: 5x114.3 with a 64.1mm hub bore, the Honda compact-car standard inherited from the same-era Civic. The ILX never had a Type-S trim; the A-Spec is a styling package, not a separate fitment. Pick your year range below for the fitment specs that apply to your specific ILX.

Find Your Acura ILX Generation

Pick your year range to see wheels and rims that fit your specific ILX. The bolt pattern is 5x114.3 with a 64.1mm hub bore across every ILX, pre-facelift and post-facelift. The two splits below are the same chassis with different front and rear styling and trim availability. The A-Spec was a trim package introduced for 2016 that included sport bumpers, side skirts, and a unique wheel design, but it sits on the same 5x114.3 / 64.1mm fitment box as the base ILX.

The Acura ILX Bolt Pattern

The ILX runs a single bolt pattern across its entire 2013-2022 production: 5x114.3 with a 64.1mm hub bore. This is the Honda compact-car standard, sometimes called 5x4.5 because 114.3mm equals 4.5 inches. The pattern matches the same-era 9th-generation Honda Civic Si (the ILX's mechanical donor) and a broad swath of Honda and Acura sedans going back decades. The 64.1mm hub bore is also the Honda compact standard.

Wheel size has stepped up over the lifetime of the chassis. The Element-measured aftermarket window runs 16 to 20 inch in diameter across both the pre-facelift and post-facelift, with the most common aftermarket choices in the 17 to 18 inch range. Width window is 7 to 9 inch front and 8 to 9.5 inch rear; the ILX is front-wheel-drive and square (matched front and rear width) is the standard configuration, but the catalog leaves a slightly wider rear option open for owners who want a mild stagger. Compare across the rest of the Acura lineup at our Acura wheels and rims hub.

Why the ILX Catalog Still Matters

The ILX is a discontinued nameplate, but the fitment data still runs because the cars are on the road and the wheel-shopping demand has not gone away. The 2022 model year was the final ILX; Acura built it as Acura's entry sedan for ten model years and replaced it with the 2023 Integra. The wheel fitment between the two cars is not interchangeable in the way some platform-sibling pairs are: the ILX and the modern Integra Base / A-Spec do share the same 5x114.3 / 64.1mm bolt pattern, but the modern Integra runs a wider aftermarket diameter range (17 to 20 inch versus 16 to 20 inch on the ILX) and the brake setup is different. A wheel that fits an ILX may not clear a modern Integra's brakes, and vice versa. The ILX and the modern Integra Type S do NOT share a bolt pattern; the Type S moves to 5x120 with a 70.1mm hub bore. We measure the ILX separately from both.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Acura ILX Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both the pre-facelift and post-facelift ILX. For the ILX that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation, lug seat depth, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what produced the per-generation fitment windows on this page and lets us answer the more common ILX-specific questions: whether wheels listed for the 9th-gen Civic Si will clear the ILX's brakes, what the practical upper diameter limit is before tire sidewall thins too far, and which aftermarket offset windows hold the wheel face flush with the front fender on the post-facelift styling. Get the year right and the wheel choice follows.

Acura ILX Wheels and Rims FAQ

Get Acura ILX Wheels Right the First Time

Pick your year range above to see wheels and rims that fit. We measure on the ILX platform across both the pre-facelift and post-facelift, confirm brake clearance separately from the same-era Honda Civic Si, and publish the offset windows that hold the wheel face flush with the front fender. Find your fit and start enjoying your build sooner.