Acura RDX Wheels and Rims

Acura RDX Aftermarket Wheel Fitment

The Acura RDX is Acura's compact luxury crossover, in production since 2007 and currently on its 3rd generation. Element Wheels measures fitment across all three generations: 1st gen TB (2007-2012), 2nd gen TB3/TB4 (2013-2018), and the current 3rd gen TC1/TC2 (2019 and up). The bolt pattern history on the RDX is stable. Every RDX from 2007 forward runs 5x114.3 with a 64.1mm hub bore. The pattern has not moved across the RDX's nineteen-year run, which is different from the Acura MDX where the bolt pattern oscillated between 5x114.3 and 5x120 multiple times. The RDX has stayed on 5x114.3 / 64.1mm the whole time. Brake package is matched front to rear across every generation, and the RDX runs square (same width front and rear) in every factory configuration. Pick your generation below for the fitment specs that apply to your specific RDX.

Find Your Acura RDX Generation

Pick your generation to see wheels and rims that fit your specific RDX. The bolt pattern is 5x114.3 with a 64.1mm hub bore on every RDX from launch through the current 3rd gen. The fitment window changes by generation as the wheel diameter and width step up across the chassis updates.

The Acura RDX Bolt Pattern Has Not Moved

Every Acura RDX from the 2007 launch through the current 3rd gen TC (2019 and up) runs 5x114.3 with a 64.1mm hub bore. The pattern has stayed steady across the entire RDX run. This is different from the larger Acura MDX, where the bolt pattern moved back and forth between 5x114.3 and 5x120 across the MDX generations. The RDX has not done that. If you have any RDX from 2007 forward, the bolt pattern is 5x114.3 and the hub bore is 64.1mm.

5x114.3 is one of the most common 5-lug patterns in the world, also written as 5x4.5 in imperial because 114.3mm equals 4.5 inches. The 5x4.5 nickname refers ONLY to 5x114.3. A wheel listed for 5x115 (the Chrysler 300 and Dodge Charger LX pattern) will NOT bolt onto an RDX, even though the two numbers read less than a millimeter apart. The 64.1mm hub bore is the Honda-Acura car and small-SUV hub spec, the same hub used on the Honda CR-V, the Honda Accord, the Honda Civic, and most Acura sedans. Compare across the rest of the Acura lineup at our Acura wheels and rims hub.

Why the RDX Runs Square Fitment

The RDX runs square (same width front and rear) in every factory configuration we have measured, on all three generations. Acura specs square fitment on the RDX because the SUV is a daily-driver luxury crossover where tire rotation between front and rear is part of the normal maintenance routine. The brake package is also matched front to rear on every RDX generation. There is no front-larger-than-rear constraint on the aftermarket wheel face. The 3rd gen TC variants (including the A-Spec, Advance, and PMC Edition trims) all share the same brake setup and the same fitment window from a wheel-face-clearance standpoint. The Acura SH-AWD system on AWD trims of the RDX does not change the bolt pattern, hub bore, or aftermarket window; the front-wheel-drive and SH-AWD RDX share the same wheel fitment.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Acura RDX Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every RDX generation back to 2007. For the RDX that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper clearance, hub bore confirmation on the 64.1mm Honda-Acura hub, lug seat depth, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Acura RDX Wheels and Rims FAQ

Get Acura RDX Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the RDX across every generation from the 2007 TB through the current TC, and the bolt pattern (5x114.3 / 64.1mm) has stayed steady across the entire run. Find your fit and start enjoying your build sooner.