Audi A7 Wheels and Rims

Audi A7 Aftermarket Wheel Fitment

The Audi A7 is Audi's executive five-door fastback, sitting on the same C-chassis architecture as the A6 sedan but wearing a sloped liftback roofline and a sportback rear hatch. Element Wheels measures the A7 across two modern generations: C7 (2011-2018) and the current C8 (2019 and up). Both generations use 5x112 with a 66.56mm hub bore, M14x1.5 lug bolts, and Quattro all wheel drive as standard. The hub spec lines up with the C7 and C8 A6 of the same year, so a wheel built for a C7 A6 of the right offset will often fit a C7 A7. What changes for the A7 vs the A6 is the rear body work and the slightly different fender opening behind the rear wheel, which can shift the practical aftermarket offset on more aggressive builds. The warm S7 and the full performance RS7 are tracked as separate hubs because their brake packages and offset windows differ from the standard A7. Pick your generation below for the fitment specs that apply to your specific A7.

Find Your Audi A7 Generation

Pick your chassis to see wheels and rims that fit your specific A7. Bolt pattern is 5x112 across both modern generations with a 66.56mm hub bore, M14x1.5 lug bolts, and Quattro AWD standard. Looking for the performance variants? Visit the Audi S7 wheels and rims hub or the Audi RS7 wheels and rims hub.

The Audi A7 Bolt Pattern

Every modern A7 uses 5x112 with M14x1.5 lug bolts. Audi runs lug bolts, not studs and nuts the way most American and Asian sedans do. The lug bolt threads directly into the hub, the wheel sits between the head of the bolt and the hub face, and there is no fixed lug stud to align the wheel before tightening. This makes a hub-centric fit more important on the A7 than on a stud-and-nut car. The centerbore is 66.56mm on both the C7 (2011-2018) and the current C8 (2019 and up) generations. The A7 did not run the older 57.1mm hub the way the C5 and C6 A6 sedans did, because the A7 line started in the C7 era and Audi had already moved to the larger hub by then.

The 5x112 / 66.56mm spec on the C7 and C8 A7 matches the wheel architecture on the C7 and C8 A6 sedan and the current A8, so a wheel that fits a 2014 A6 of the right offset will often fit a 2014 A7. The bolt math works because the A7 is the same C-chassis underneath the fastback roof. The pattern is also shared with the rest of the modern Audi sedan family (A3, A4, A5, A8), the current Q5 and Q7, and the VW Group passenger-car siblings. It is NOT the same as the 5x130 pattern Audi used on the first generation Q7 SUV. Compare against the A6 chassis hub at our Audi A6 wheels and rims hub, and against the rest of the Audi lineup at our Audi wheels and rims hub.

Why the A7 Body Style and Brake Package Determine Wheel Fit

The A7 is sold as a five-door fastback in North America with a single body style per generation. There is no Avant wagon or Allroad variant of the A7 the way the A6 has. What does vary across the A7 lineup is the brake package and the trim level. Base brakes ship on the 2.0T and 3.0T trims. The S Line and Prestige option moves up a tier on the front rotor, which tightens the offset clearance behind the wheel face. Quattro AWD is standard on every modern A7, so drivetrain is not a fitment variable on this car. Both Quattro AWD and the square (non-staggered) factory configuration go together. The same wheel and tire size on every corner is the default on the standard A7, with staggered aftermarket builds running on a few wider rear setups but only as a choice, not a requirement.

Worth being clear: the S7 (the warm performance variant) and the RS7 (the full performance variant) ship from the factory with their own brake packages and their own factory wheel sizes. They are tracked as separate catalog hubs because their fitment windows do not match the standard A7. The RS7 in particular ships with the largest Audi brake package and the most aggressive factory wheel of any A7-platform car. If you have an S7 or an RS7, use the dedicated S7 or RS7 wheel hub or contact our team before ordering off the standard A7 page.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Audi A7 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both A7 generations. For the A7 that means clearance from the wheel to the fender (with the sloped fastback rear that differs from the A6 sedan rear), gap between the back of the wheel and the suspension, brake caliper height across the base and S Line trim packages, hub bore confirmation at 66.56mm, and lug bolt seat depth for M14x1.5 bolts. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Audi A7 Wheels and Rims FAQ

Get Audi A7 Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the A7 platform across the C7 and C8, separate the standard A7 from the S7 and RS7, and route performance buyers to their dedicated hubs to avoid mis-fits on brake clearance. Find your fit and start enjoying your build sooner.