Chrysler Cirrus Wheels and Rims

Chrysler Cirrus Aftermarket Wheel Fitment

The Chrysler Cirrus was Chrysler's mid-size four door sedan on the JA "cloud car" platform, produced 1995 through 2000 in a single generation. The Cirrus shared its chassis exactly with the 1st gen Dodge Stratus sedan and the Plymouth Breeze. The three cars were sold under different badges through different dealer networks but they sit on the same JA underbody, the same front wheel drive layout, and the same 5x100 bolt pattern with a 57.1mm hub bore. The Cirrus was discontinued after the 2000 model year and replaced for 2001 by the Chrysler Sebring sedan on the new JR platform. Aftermarket diameter on the Cirrus runs from 15 inch up to 20 inch in our catalog. Find the wheel and rim recommendations below.

Find Your Chrysler Cirrus Generation

The Cirrus ran a single generation from 1995 through 2000. Pick the year range to see wheels and rims that fit your specific Cirrus.

The Chrysler Cirrus Bolt Pattern

Every Chrysler Cirrus (1995-2000) uses 5x100 with a 57.1mm hub bore, M12x1.5 lug nuts, and 5 lugs. 5x100 is the small to mid-size Chrysler pattern of the 1990s and early 2000s. The Cirrus shares its bolt math exactly with the 1st gen Dodge Stratus sedan (1995-2000) and the Plymouth Breeze (1995-2000). The three are JA "cloud car" twins under different badges. The pattern also matches the Dodge Neon, the Chrysler PT Cruiser, and the 2nd gen Chrysler Sebring sedan and Sebring convertible (2001-2006, JR platform). A 5x100 wheel built for any of those cars will line up to a Cirrus hub in pattern.

Important: 5x100 is NOT the same as 5x114.3 or 5x115. 5x100 is 14.3mm tighter than 5x114.3 and 15mm tighter than 5x115. None of the larger Chrysler products (300, 300M, Concorde, LHS, Pacifica) will share a wheel with the Cirrus. Also note: the Chrysler Sebring coupe (2001-2005) is a Mitsubishi-built rebadge on 5x114.3, not the JR-platform sedan's 5x100. Even within the Chrysler family the same nameplate can carry two completely different bolt patterns. Compare across the rest of the Chrysler lineup at our Chrysler wheels and rims hub.

Chrysler Cirrus Fitment Detail

The Cirrus is front wheel drive across the entire lineup. It does not accept staggered fitment as a recommended setup. The Cirrus runs square with matching wheel and tire sizes on every corner. Aftermarket diameter runs from 15 inch up to 20 inch in our measured window, with 16 and 17 inch the most common upgrade choices from factory wheels. Factory wheel sizes ran 15 to 16 inch depending on trim, with the LXi receiving the larger factory option. The Cirrus shares its body geometry and brake package very closely with the 1st gen Dodge Stratus sedan and the Plymouth Breeze. They are siblings on the same JA chassis with different fascias.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Chrysler Cirrus Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Cirrus on the JA cloud car chassis. For the Cirrus that means hub bore confirmation at 57.1mm, clearance from the wheel to the fender, gap between the back of the wheel and the suspension at full lock, brake caliper height, lug seat depth, and lug thread confirmation at M12x1.5. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Cirrus is an older platform with a smaller aftermarket footprint today, but the JA chassis shows up often enough across the Stratus and Breeze that we keep the measurements current. That measurement work is what lets us confirm 5x100 / 57.1mm cleanly and warn against the larger Chrysler patterns (5x114.3 on the Concorde / LHS / 300M and 5x115 on the modern 300) that look similar at a glance but do not bolt.

Chrysler Cirrus Wheels and Rims FAQ

Get Chrysler Cirrus Wheels Right the First Time

Pick the year range above to see wheels and rims that fit. We measure on the JA cloud car platform across the Cirrus, Stratus sedan, and Breeze. The catalog reflects what actually clears the fender, the brake assembly, and the suspension on this body. Find your fit and start enjoying your build sooner.