Chrysler Concorde Wheels and Rims

Chrysler Concorde Aftermarket Wheel Fitment

The Chrysler Concorde was Chrysler's full-size LH-platform sedan from 1993 through 2004, sold across two generations: the 1st gen LH (1993-1997) and the 2nd gen LH (1998-2004). The Concorde anchored the LH-platform "cab forward" lineup that included the Dodge Intrepid, the Eagle Vision (1st gen), and later the Chrysler LHS and 300M (2nd gen). Every Concorde we cover, across both generations, uses 5x114.3 with a 71.5mm hub bore. The pattern carried through the full production run. The Concorde was discontinued after the 2004 model year and replaced eventually by the much different rear wheel drive 300 in 2005, which sits on a completely separate platform. Find your generation below and the wheel and rim recommendations follow.

Find Your Chrysler Concorde Generation

Pick your generation to see wheels and rims that fit your specific Concorde. The bolt pattern is the same across both generations, so the wheel that fits a 1997 Concorde will also bolt to a 2001 Concorde in pattern and hub. The body geometry between generations is what changes the fitment window.

The Chrysler Concorde Bolt Pattern

Every Chrysler Concorde (1993-2004) uses 5x114.3 with a 71.5mm hub bore. The pattern is uniform across both LH-platform generations and every trim. 5x114.3 has the imperial nickname 5x4.5 (114.3mm = 4.5 inches) and the two notations are identical. 5x114.3 / 5x4.5 is the long-standing LH-platform pattern, shared with the Dodge Intrepid (1993-2004), the Eagle Vision (1993-1997), and the Chrysler LHS and 300M (1999-2004). A 5x114.3 wheel built for any of those LH sedans will bolt to a Concorde in pattern and hub centering.

The detail that trips buyers on Chrysler products: 5x114.3 is NOT the same as 5x115. The two patterns sit roughly 0.7mm apart and they do not cross. The modern Chrysler 300 (2005 and up) uses 5x115, not 5x114.3, on a completely different rear wheel drive platform. A 300 wheel will NOT fit a Concorde and a Concorde wheel will NOT fit a 300. The naming similarity catches people out. Same goes for the Crossfire (5x112 on the Mercedes SLK platform). Confirm the pattern matches before ordering. Compare against the rest of the Chrysler lineup at our Chrysler wheels and rims hub.

1st Gen vs 2nd Gen Concorde Fitment

Both Concorde generations were front wheel drive across the entire lineup. Neither generation accepts staggered fitment as a recommended setup. The Concorde runs square with matching wheel and tire sizes on every corner. What changes between the 1993-1997 1st gen and the 1998-2004 2nd gen is the body geometry: the 2nd gen redesign brought a slightly different fender opening, a wider track, and a refreshed brake package on the higher trims. The bolt pattern, hub bore, lug size, and aftermarket width window stay the same. Aftermarket diameter on the Concorde runs from 16 inch up to 21 inch in our catalog, with 17 and 18 inch the most common upgrades from factory wheels.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Chrysler Concorde Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Concorde across both LH-platform generations. For the Concorde that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation, lug seat depth, and turning clearance on the front. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Concorde is an older platform with a smaller current aftermarket footprint, but the LH chassis shows up often enough that we keep the measurements current. That measurement work is what lets us call out the 5x114.3 vs 5x115 mismatch as a real risk on Chrysler products. The two patterns are 0.7mm apart and people swap them by accident more than any other Chrysler-family pair we see.

Chrysler Concorde Wheels and Rims FAQ

Get Chrysler Concorde Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the LH platform across both Concorde generations and we call out the 5x114.3 vs 5x115 mismatch that catches Chrysler buyers out. Find your fit and start enjoying your build sooner.