Chrysler LHS Wheels and Rims

Chrysler LHS Aftermarket Wheel Fitment

The Chrysler LHS was Chrysler's full-size flagship sedan on the LH "cab forward" platform, produced 1994 through 2001 across two generations. The 1st gen LHS (1994-1997) sat at the top of the original LH lineup alongside the Chrysler Concorde, Dodge Intrepid, and Eagle Vision. Chrysler skipped the 1998 model year on the LHS during the LH redesign. The 2nd gen LHS returned for 1999-2001 on the rebuilt LH chassis, sharing that generation with the Chrysler 300M, the 2nd gen Concorde, and the 2nd gen Intrepid. Across both generations the LHS uses 5x114.3 with a 71.5mm hub bore. The pattern carried through the full 1994-2001 production run. The LHS was discontinued after the 2001 model year, replaced eventually by the rear wheel drive Chrysler 300 in 2005, which sits on a completely different platform with a different bolt pattern. Find your generation below and the wheel and rim recommendations follow.

Find Your Chrysler LHS Generation

Pick your generation to see wheels and rims that fit your specific LHS. The bolt pattern is the same across both generations, so a wheel that fits a 1996 LHS will also bolt to a 2000 LHS in pattern and hub. What changes between generations is the body geometry: the 2nd gen redesign brought a different fender opening, a wider track, and a refreshed brake package.

The Chrysler LHS Bolt Pattern

Every Chrysler LHS (1994-2001) uses 5x114.3 with a 71.5mm hub bore. The pattern is uniform across both LH-platform generations and every trim. 5x114.3 has the imperial nickname 5x4.5 (114.3mm = 4.5 inches) and the two notations are identical. 5x114.3 / 5x4.5 is the long-standing LH-platform pattern, shared with the Chrysler Concorde (1993-2004), the Chrysler 300M (1999-2004), the Dodge Intrepid (1993-2004), and the Eagle Vision (1993-1997). A 5x114.3 wheel built for any of those LH sedans will bolt to an LHS in pattern and hub centering.

The detail that trips buyers on Chrysler products: 5x114.3 is NOT the same as 5x115. The two patterns sit roughly 0.7mm apart and they do not cross. The modern Chrysler 300 (2005 and up) uses 5x115, not 5x114.3, on a completely different rear wheel drive platform. A 300 wheel will NOT fit an LHS and an LHS wheel will NOT fit a 300. The naming similarity catches people out because both cars wear the Chrysler badge and both are full-size sedans, but they share nothing mechanically. Compare against the rest of the Chrysler lineup at our Chrysler wheels and rims hub.

1st Gen vs 2nd Gen LHS Fitment

Both LHS generations were front wheel drive across the entire lineup. Neither generation accepts staggered fitment as a recommended setup. The LHS runs square with matching wheel and tire sizes on every corner. What changes between the 1994-1997 1st gen and the 1999-2001 2nd gen is the body geometry: the 2nd gen redesign brought a slightly different fender opening, a wider track, and a refreshed brake package. The bolt pattern, hub bore, lug size, and aftermarket width window stay the same. Aftermarket diameter on the LHS runs from 16 inch up to 21 inch in our catalog, with 17 and 18 inch the most common upgrades from factory wheels. The 2nd gen LHS shares its body dimensions and brake setup very closely with the 2nd gen Chrysler 300M of the same era. They are siblings on the same chassis with different trim levels and front fascia treatments.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Chrysler LHS Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the LHS across both LH-platform generations. For the LHS that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation at 71.5mm, lug seat depth, and turning clearance on the front. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The LHS is an older platform with a smaller current aftermarket footprint than newer Chrysler products, but the LH chassis shows up often enough across the Concorde, 300M, and Intrepid that we keep the measurements current. That measurement work is what lets us call out the 5x114.3 vs 5x115 mismatch as a real risk on Chrysler products. The two patterns are 0.7mm apart and people swap them by accident more than any other Chrysler-family pair we see.

Chrysler LHS Wheels and Rims FAQ

Get Chrysler LHS Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the LH platform across both LHS generations and we call out the 5x114.3 vs 5x115 mismatch that catches Chrysler buyers out. Find your fit and start enjoying your build sooner.