Chrysler Sebring Wheels and Rims

Chrysler Sebring Aftermarket Wheel Fitment

The Chrysler Sebring was Chrysler's mid-size sedan, coupe, and convertible from 1996 through 2010. The nameplate is one of the more confusing in our catalog for wheel fitment because the bolt pattern depends on both the year and the body style. Early Sebring sedans and convertibles (1996-2006) use 5x100 with a 57.1mm hub bore. The Sebring Coupe (1996-2006), which was a Mitsubishi-derived JR-platform car, uses 5x114.3 with a 67.1mm hub bore. Then in 2007 Chrysler redesigned the Sebring sedan and convertible on a new chassis and moved them to 5x114.3 with a 67.1mm hub bore, matching the discontinued coupe's pattern. Chrysler retired the Sebring after the 2010 model year and replaced it with the Chrysler 200. Element Wheels measures fitment on every Sebring body and generation. Find your year and body style below.

Find Your Chrysler Sebring Generation and Body

Pick your year and body style to see wheels and rims that fit your specific Sebring. The bolt pattern changes between the early sedan/convertible and the post-2007 redesign, and the early Sebring Coupe uses a third pattern again. Body style matters as much as the year on this car.

The Chrysler Sebring Bolt Pattern

The Sebring bolt pattern is the trickiest thing to get right on this nameplate. There are three pattern situations across the 1996-2010 run:

• Sebring Sedan and Convertible (1996-2006): 5x100 with a 57.1mm hub bore. Same family as the Dodge Stratus and Plymouth Breeze of the same era (Chrysler JA / JR platform sedans).
• Sebring Coupe (1996-2006): 5x114.3 with a 67.1mm hub bore. The coupe was a Mitsubishi-derived JR-platform car (Mitsubishi Eclipse cousin) and uses the larger Mitsubishi-pattern hub. Completely different from the sedan and convertible of the same years.
• Sebring Sedan and Convertible (2007-2010): 5x114.3 with a 67.1mm hub bore. Chrysler redesigned the Sebring sedan in 2007 on a new chassis (the JS platform) and moved it to the larger 5x114.3 pattern. The convertible followed in 2008.

What this means in practice: 1996-2006 Sebring sedan and convertible wheels do NOT cross to either the same-era Sebring Coupe OR to the 2007-2010 Sebring sedan and convertible. The 5x100 and 5x114.3 patterns are 14mm apart and the studs do not align. The imperial nickname 5x4.5 refers only to 5x114.3 (114.3mm = 4.5 inches) and never to 5x100. Anyone selling you "5x4.5" wheels for a 1996-2006 Sebring sedan or convertible is selling the wrong pattern. Compare against the rest of the Chrysler lineup at our Chrysler wheels and rims hub.

Sebring Body and Generation Fitment Detail

The Sebring was offered as a sedan, a coupe, and a convertible across its 1996-2010 run, with different chassis underneath in different years. Every Sebring is front wheel drive. None of the trims or body styles accept staggered fitment as a recommended setup. The Sebring runs matching wheel and tire sizes on every corner. The fitment box differences between the four leaves come from the bolt pattern shift, the hub bore shift, and the body style (the convertible has a different fender opening than the sedan, and the coupe is a completely different car underneath).

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Chrysler Sebring Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every Sebring body and generation. For the Sebring that means clearance from the wheel to the fender, gap between the back of the wheel and the strut tower, brake caliper height, hub bore confirmation, lug seat depth, and turning clearance on the front. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Sebring is one of the highest-risk platforms in the catalog for the wrong-pattern problem. We have seen customers come to us after another shop sold them 5x114.3 wheels for a 1998 Sebring Convertible, on the assumption that all Sebring convertibles share a pattern. That early Sebring Convertible is 5x100, not 5x114.3, and the wheels do not bolt up. The measurement work and the four-leaf split on this page are what protect against that confusion.

Chrysler Sebring Wheels and Rims FAQ

Get Chrysler Sebring Wheels Right the First Time

Pick your year and body style above to see wheels and rims that fit. We measure on the Sebring platform across the sedan, the coupe, and the convertible, and we keep the 5x100 and 5x114.3 splits separate. Find your fit and start enjoying your build sooner.