Honda CR-Z Wheels and Rims

Honda CR-Z Aftermarket Wheel Fitment

The Honda CR-Z is Honda's sport hybrid two-seater coupe, the spiritual successor to the 1980s and 1990s Honda CR-X. The CR-Z was sold in the US across the 2011 through 2016 model years on one chassis platform (ZF1, with a mid-cycle refresh on ZF2). Element Wheels measures and publishes fitment for the CR-Z across the full US production run. The CR-Z runs a 5x114.3 bolt pattern, a 64.1mm hub bore, and an M12x1.5 thread on a 5-lug hub. Those numbers held steady across every CR-Z trim and model year. The aftermarket wheel and rim window we measure runs from 16 to 19 inch in diameter, 6 to 8 inch wide, and the fitment is square (same wheel spec front and rear). The CR-Z is the rare modern Honda hybrid that came with a 6-speed manual transmission. Honda discontinued the CR-Z after the 2016 model year in the US, which means the fitment window is now stable.

Find Your Honda CR-Z Generation

The Honda CR-Z ran one US generation across the 2011-2016 model years. Bolt pattern, hub bore, thread, and lug count are identical across every year and trim, including the Base, EX, and EX-L Navi. Pick your year range to see wheels and rims that fit.

The Honda CR-Z Bolt Pattern

Every Honda CR-Z sold in the US from the 2011 model year through 2016 runs the same bolt pattern: 5x114.3. The hub bore is 64.1mm. The thread pitch is M12x1.5 on a 5-lug hub. Those numbers do not shift between Base, EX, and EX-L Navi trims and they do not shift across the production run, including the 2013 mid-cycle refresh. The CR-Z shares the 5x114.3 / 64.1mm hub spec with the same-era Honda mainstream lineup (Civic Si of the day, the 9th generation Civic, the 9th generation Accord).

One detail worth flagging because it confuses buyers on Honda 5-lug platforms. 5x114.3 is NOT the same pattern as 5x115. The two sit roughly 0.7mm apart on the hub circle and a wheel built for one will not properly seat on the other. The 5x4.5 imperial nickname refers to 5x114.3 only (114.3mm equals 4.5 inches exactly). The 5x115 pattern lives on some American sedans like the Chrysler 300 and Dodge Charger and those wheels will not fit your CR-Z. Compare across the rest of the Honda lineup at our Honda wheels and rims hub.

Why the CR-Z Fitment Box Is Tight

The CR-Z is a short, low, two-seater coupe with tight fender openings and a chassis that was designed around the factory 16 inch and 17 inch wheel package. The aftermarket window is narrower than what you'll see on most Honda sedans of the same era. Our measured diameter range runs from 16 to 19 inch and the width range runs from 6 to 8 inch. The factory tire is taller-sidewall than the typical sport coupe of the era because the CR-Z was tuned for hybrid efficiency as well as handling, and the wheel and tire window reflects that. The CR-Z is the spiritual descendant of the CR-X. CR-Z owners tend to build for either a 1990s-era street style (smaller diameter, more aggressive offset, fender-flush stance) or a clean modern bump up one diameter from factory.

The CR-Z is front wheel drive across every model year and the typical CR-Z build is non-staggered (square, same wheel spec front and rear). Our measured catalog publishes a single width range that applies to all four corners. Square also lets you rotate tires across all four corners for longer tire life, which is the more common CR-Z build. Looks-priority stagger on a front wheel drive two-seater is a stylistic choice rather than a performance one.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Honda CR-Z Wheels

Element Wheels measures fitment on the CR-Z directly across the full 2011-2016 US production run. For the CR-Z that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation at 64.1mm, lug stud height, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what produced the diameter and width window on this page. The CR-Z went out of US production after the 2016 model year, which means the aftermarket window is now stable. The wheel sizes and widths we publish here will not change because Honda is not refreshing the chassis. Our catalog covers the practical diameter range for a short, low, hybrid sport coupe: 16 inch matches the factory diameter and is the common pick for owners who want a wheel change with no ride compromise, with 17, 18, and 19 inch available for more aggressive looks.

Honda CR-Z Wheels and Rims FAQ

Get Honda CR-Z Wheels Right the First Time

Pick your year range above to see wheels and rims that fit. We measure the CR-Z across the full 2011-2016 US production run, and our window covers 16 to 19 inch in diameter with widths from 6 to 8 inch square. The fitment box is stable because Honda discontinued the CR-Z after 2016 in the US. Find your fit and start enjoying your build sooner.