Hyundai Genesis Sedan Wheels and Rims

Hyundai Genesis Sedan Aftermarket Wheel Fitment

The Hyundai Genesis Sedan is the full-size rear-drive luxury sedan Hyundai sold from 2009 through the 2016 model year, before spinning off the Genesis luxury sub-brand and renaming this car the Genesis G80 for 2017. The first generation BH (2009-2014) launched as Hyundai's first serious shot at the entry-luxury segment against the BMW 5 Series and the Lexus GS. The second generation DH (2015-2016) refreshed the platform with a tauter chassis and a wider lineup that included the 5.0 R-Spec V8 with its larger front brake package. Every Hyundai-branded Genesis Sedan runs the same wheel architecture: 5x114.3 bolt pattern with a 67.1mm hub bore, an M12x1.5 thread, and a 5 lug count. The catalog supports an optional staggered factory fitment across the lineup. Pick your generation below for the fitment specs.

Customer confusion worth flagging up top. The Hyundai Genesis Sedan and the Hyundai Genesis Coupe share a nameplate but they are NOT the same car. The Sedan is the full-size luxury four-door we cover on this hub. The Coupe is a separate rear-drive sport coupe on a different chassis. If you own a Genesis Coupe, browse the Hyundai Genesis Coupe wheels hub instead. And if your sedan is a 2017 or later, you have the Genesis G80, not the Hyundai Genesis Sedan; see the Genesis G80 wheels hub.

Find Your Hyundai Genesis Sedan Generation

Pick your generation to see wheels and rims that fit your specific Genesis Sedan. The first generation BH (2009-2014) and the second generation DH (2015-2016) share the 5x114.3 bolt pattern and the 67.1mm hub bore, but offset windows and brake clearance shift slightly across the platform refresh. The 5.0 R-Spec V8 trim on the DH ships with a larger front brake package, which tightens the offset window relative to the base 3.8L V6.

The Hyundai Genesis Sedan Bolt Pattern

Every Hyundai Genesis Sedan from 2009 through 2016 runs a 5x114.3 bolt pattern with a 67.1mm hub bore. The imperial nickname for this pattern is 5x4.5 because 114.3mm equals 4.5 inches exactly. The lug count is 5, the thread pitch is M12x1.5, and the recommended factory torque is in the same range as the rest of the Hyundai Motor Group rear-drive sedans of the era (always confirm against your owner manual for your exact year). The bolt pattern, hub bore, and lug spec did not change between the BH first generation and the DH second generation; the 2017 renaming to Genesis G80 also did not change the pattern.

One detail worth flagging because we have seen it confuse buyers. 5x114.3 is NOT the same pattern as 5x115. The two sit roughly 0.7mm apart on the hub circle and a wheel built for one will not properly seat on the other. The Genesis Sedan is 5x114.3 only. The imperial nickname 5x4.5 refers to 5x114.3 specifically (114.3mm equals 4.5 inches). The 5x115 pattern lives on some American sedans (Chrysler 300, Dodge Charger and Challenger, Cadillac CTS, etc.) and those wheels will not fit your Genesis Sedan. When you are shopping, confirm the wheel listing says 5x114.3 specifically. Compare across the rest of the Hyundai lineup at our Hyundai wheels and rims hub.

Why the Generation and Trim Change the Fitment Window

The Genesis Sedan went through one platform refresh during its Hyundai-branded run. The BH first generation (2009-2014) launched the platform; the 5.0 R-Spec V8 joined the BH lineup for 2012-2014 with a larger front Brembo brake package. The DH second generation (2015-2016) refreshed with a tauter suspension, wider track, and continued the 5.0 R-Spec V8 with its larger front brake. The 3.8L V6 trims across both generations carried the mid-size brake hardware. Front larger than rear on the R-Spec is the normal configuration on a performance luxury sedan where the front axle handles the bulk of the braking force.

The factory configuration on most Genesis Sedan trims is square (same width front and rear). The catalog supports optional staggered fitment with a wider rear, which is the configuration many aftermarket buyers pick for the deeper rear face look. Both rear wheel drive and all wheel drive (HTRAC on later DH trims) Genesis Sedans share the same wheel fitment box. The variable that does change the recommendation is the trim and the brake package on the DH.

How We Confirm Fitment on Hyundai Genesis Sedan Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both Genesis Sedan generations. For the Genesis Sedan that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height across the base V6 and the 5.0 R-Spec V8 trims, hub bore confirmation at 67.1mm, lug nut height (M12x1.5 thread), and the chassis-update deltas between the BH first generation and the DH second generation. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Hyundai Genesis Sedan Wheels and Rims FAQ

Get Hyundai Genesis Sedan Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure the Genesis Sedan across the BH first generation and the DH second generation, separate the 3.8L V6 trims from the 5.0 R-Spec V8 with its larger front brake, and confirm the 5x114.3 bolt pattern is not confused with 5x115. Find your fit and start enjoying your build sooner.