Kia Borrego Wheels and Rims

Kia Borrego Aftermarket Wheel Fitment

The Kia Borrego was Kia's body-on-frame full-size SUV in the US market, sold for the 2009 and 2010 model years on the HM chassis. The Borrego is sold as the Kia Mohave in Korea, the Middle East, and other export markets, where the same vehicle continued in production well past the US discontinuation date. The mounting interface is constant across every model year: 6x114.3 bolt pattern, 67.1mm hub bore, M12x1.5 thread, 6 lug, square fitment front and rear. The truck-pattern 6-lug puts the Borrego in a different fitment family than the rest of the Kia US lineup (which runs passenger-car 5-lug patterns on most models). Element Wheels measures fitment on the Borrego directly. Pick your year range below for the wheel and rim recommendations.

Find Your Kia Borrego Year

The Borrego ran one generation across the 2009-2010 US production. Bolt pattern, hub bore, thread pitch, and lug count are constant year to year. Pick the year range to see the wheels and rims that fit.

The Kia Borrego Bolt Pattern

Every Kia Borrego, 2009 and 2010, runs 6x114.3 with a 67.1mm hub bore. The thread pitch is M12x1.5 and the lug count is 6 on every Borrego, on every trim, in every model year. 6x114.3 is a truck-pattern 6-lug used on body-on-frame mid-size and full-size SUVs and pickups. It is the only 6-lug pattern in the Kia US lineup.

The 67.1mm hub bore on the Borrego is on the smaller side for a 6x114.3 wheel. If your fitment needs rings, they'll be included with the order. The 6x114.3 / 67.1mm combination is unique to the Borrego inside the Kia lineup. Compare the Borrego against the rest of the Kia lineup at our Kia wheels and rims hub.

Borrego Fitment Box and the Mohave Connection

The Borrego runs as a square fitment across every model year: same wheel spec front and rear, brake size matched front to rear. Trim variation across the LX V6, EX V6, and EX V8 lines does not split the fitment box. The body-on-frame chassis and the longer suspension travel let the Borrego carry a wider offset range than a unibody crossover.

The Kia Mohave is the same vehicle as the Borrego, sold under the Mohave name in Korea, the Middle East, and other export markets. Mohave is a rebadge of the same HM-chassis SUV with the same 6x114.3 bolt pattern, the same 67.1mm hub bore, and the same M12x1.5 thread. Wheels listed for the export Mohave fit the US-market Borrego exactly. The Borrego nameplate was retired in the US after the 2010 model year, while Kia continued building the Mohave in Korea for export markets through later generations.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Kia Borrego Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Borrego. For the Borrego that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension and brake caliper, 67.1mm hub bore confirmation, lug seat geometry on the M12x1.5 thread, and turning clearance with the wheel and tire installed at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Borrego is the only Kia in the US lineup that uses the truck-pattern 6-lug 6x114.3 bolt pattern. The hub bore (67.1mm) is smaller than the typical body-on-frame 6x114.3 wheel is engineered around, so confirming the hub centric ring step-down is part of every Borrego fitment we publish. Load rating on the tire matters more on the Borrego than on a passenger car because the body-on-frame curb weight (around 4,700 lb in our catalog) runs higher than a unibody crossover, and we factor SUV load index into the diameter and width window we publish.

Kia Borrego Wheels and Rims FAQ

Get Kia Borrego Wheels Right the First Time

Pick your year range above to see wheels and rims that fit. We measure on the Borrego directly and treat every trim and every model year as one fitment family across the 2009-2010 US run. Kia retired the Borrego nameplate after 2010 in the US, and the used Borrego aftermarket community is still active. Find your fit and start enjoying your build sooner.