Kia Telluride Wheels and Rims

Kia Telluride Aftermarket Wheel Fitment

The Kia Telluride launched as a 2020 model and quickly became one of the biggest hits in the three-row midsize SUV segment. It has run on a single platform since launch with the Hyundai/Kia midsize 5x114.3 bolt pattern and a 67.1mm hub bore. The factory ships the Telluride with 18 inch wheels on base trims and steps up to 20 inch on SX and Nightfall trims. Element Wheels has measured the Telluride fitment window from 18 inch through 22 inch. This is a square (same width front and rear) build by default. Fitment notes below.

The Kia Telluride Bolt Pattern

Every Kia Telluride from launch through the current model year uses 5x114.3 with a 67.1mm hub bore. This is the Hyundai and Kia midsize SUV standard, the same pattern used on the Hyundai Palisade (Kia's platform-share corporate sibling), the Kia Sorento, and most other Hyundai/Kia midsize platforms. The pattern is also written as 5x4.5 in imperial. 5x114.3 is one of the most common 5-lug patterns in passenger vehicles. Wheels sized correctly for any 5x114.3 vehicle physically bolt to the Telluride. What does not transfer is the hub bore size and the offset window, which are specific to the Telluride chassis.

Telluride Factory Spec and the Aftermarket Window

From the dealer, the Telluride ships with 18 inch wheels on base LX and S trims, 20 inch wheels on SX and Nightfall trims, and the Telluride X-Pro trim runs an 18 inch all-terrain setup with more aggressive tire. Factory hub bore is 67.1mm across every trim. The aftermarket fitment window opens up the upgrade range: customers commonly step a base 18 inch trim up to 20 or 22 inch, and the X-Pro buyers commonly stay at 18 inch but switch to a more aggressive all-terrain wheel. The Telluride runs square (same width front and rear) in every factory configuration we have measured.

How We Confirm Fitment on Kia Telluride Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Telluride. For this SUV that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper clearance, hub bore confirmation on the 67.1mm Hyundai/Kia hub, lug stud height, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what produced the fitment window on this page. It is also why every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you. Compare against the rest of the Kia lineup at our Kia wheels and rims hub.

Kia Telluride Wheels and Rims FAQ

Get Kia Telluride Wheels Right the First Time

Use the customer tools below to dial in the right wheels for your Telluride. We measure on the Telluride platform and stock fitments from 18 inch through 22 inch.