Mitsubishi Endeavor Wheels and Rims

Mitsubishi Endeavor Aftermarket Wheel Fitment

The Mitsubishi Endeavor is the mid-size crossover Mitsubishi sold in the U.S. from 2004 through 2011 across LS, XLS, Limited, and the late SE trims. Element Wheels measures the Endeavor as a single fitment box across every trim. The bolt pattern is 5x114.3 with a 67.1mm hub bore and the M12x1.5 lug thread. Five lugs. Aftermarket diameter on the Endeavor runs from 17 inch up to 22 inch in our catalog, with 18 inch and 20 inch the most common upgrade choices on this body. The Endeavor is a closed historical platform in the U.S. The 67.1mm hub bore is the long running Mitsubishi platform spec also used on the Eclipse, the Galant 8th and 9th generations, the Outlander, the 3000GT, the Lancer Evolution, and the 9th gen Lancer.

Find Your Mitsubishi Endeavor Generation

The U.S. Mitsubishi Endeavor ran a single generation from 2004 through 2011. Pick the year range to see wheels and rims that fit. LS, XLS, Limited, and SE trims all share the same hub spec and the same measured fitment box.

The Mitsubishi Endeavor Bolt Pattern

Every U.S. Mitsubishi Endeavor (2004-2011) uses 5x114.3 with a 67.1mm hub bore and M12x1.5 lug thread. Five lugs. The bolt pattern is the same across LS, XLS, Limited, and SE trims. 5x114.3 has the imperial nickname 5x4.5 (114.3mm = 4.5 inches exactly) and the two notations are identical. M12x1.5 is the standard thread pitch for the broader Mitsubishi mid-size and performance lineup, different from the M12x1.25 Japanese fine pitch found on Mitsubishi's smaller cars like the Mirage.

Important: 5x114.3 is NOT the same as 5x115. The two patterns sit only 0.7mm apart and do not bolt across. The 5x4.5 imperial nickname refers specifically to 5x114.3 (114.3mm equals exactly 4.5 inches). 5x115 lives on cars like the Chrysler 300 and the Dodge Charger LX. If a wheel listing says "5x115" without offering 5x114.3, it does not fit the Endeavor.

The 67.1mm hub bore is the long running Mitsubishi platform spec. The Endeavor lines up with the Eclipse, the Galant 8th and 9th generations, the Outlander, the 3000GT, the Lancer Evolution, and the 9th gen Lancer on the same 67.1mm hub bore and the same 5x114.3 / M12x1.5 thread. Wheels that fit the 9th gen Galant or the 2007-2013 Outlander bolt across to the Endeavor within the same factory diameter window. Compare across the rest of the Mitsubishi lineup at our Mitsubishi wheels and rims hub.

Endeavor Trim and Platform Detail

The Endeavor is a unibody mid-size crossover that ran a 3.8 liter V6 across the lineup, paired with a 4 speed automatic and offered in front wheel drive or all wheel drive. LS, XLS, Limited, and the late SE trims all share the same hub spec and the same wheel interface. Our measured fitment box treats every Endeavor trim and drivetrain as a single window because the all wheel drive and front wheel drive share the same bolt pattern, hub bore, lug thread, and offset window on this car. The Endeavor ran a 17 inch wheel on the LS trim and an 18 inch wheel on the higher trims from the factory. The aftermarket diameter window opens to 22 inch in our catalog, which is genuinely large on this mid-size crossover body.

The Endeavor is square front and rear across every trim. There is no staggered fitment in the factory or aftermarket on this car. The mid-size crossover proportion handles a larger wheel diameter visually than a sedan would. 18 inch and 20 inch are the most common upgrade choices and balance visual presence with ride quality. The 22 inch aftermarket end requires careful offset selection and a low-profile tire.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Mitsubishi Endeavor Wheels

Element Wheels measures fitment on the Endeavor across every trim and both drivetrains. For the Endeavor that means clearance from the wheel to the fender on the mid-size crossover body, gap between the back of the wheel and the front strut on the front wheel drive layout and the rear half-shaft on the all wheel drive layout, brake caliper height, hub bore confirmation on the 67.1mm Mitsubishi platform hub, lug seat depth on the M12x1.5 thread, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull these from manufacturer spec sheets the way most retailers do.

The Endeavor is a mid-size crossover and the most common mistake we see is buyers ordering a 5x115 wheel intended for a Chrysler 300 or a Dodge Charger, assuming the 0.7mm difference is interchangeable. It is not. 5x115 stresses the wheel studs on a 5x114.3 hub and is a safety concern, not just a fitment issue. We confirm 5x114.3 specifically, the 67.1mm hub bore, and the brake clearance before any wheel ships.

Mitsubishi Endeavor Wheels and Rims FAQ

Get Mitsubishi Endeavor Wheels Right the First Time

Pick the year range above to see wheels and rims that fit. We measure on the Endeavor as a single fitment box across LS, XLS, Limited, and SE trims and across both front wheel drive and all wheel drive, with the 5x114.3 bolt pattern, the 67.1mm Mitsubishi platform hub bore, and the M12x1.5 thread pitch confirmed before any wheel ships. Find your fit and start enjoying your build sooner.