Nissan Cube Wheels and Rims

Nissan Cube Aftermarket Wheel Fitment

The Nissan Cube is the Z12 platform boxy subcompact Nissan sold in the US from 2009 through 2014, including the styled Krom trim. Element Wheels measures the Cube as a single fitment box across base, S, SL, and Krom trims. The bolt pattern is 4x114.3 with a 66.1mm hub bore and the Japanese M12x1.25 fine pitch lug thread. Four lugs. Aftermarket diameter on the Cube runs from 15 inch up to 19 inch in our catalog, with 16 inch and 17 inch the most common upgrade choices on this body. The Cube is a closed historical platform in the US. Nissan continued the Cube globally on the Z12 chassis through 2019, but US sales ended after the 2014 model year. The Z12 Cube shares the Versa B platform foundation, so the hub spec lines up with the first generation Versa (2007-2013) running the same 4x114.3 / 66.1mm hub.

Find Your Nissan Cube Generation

The US Nissan Cube ran a single generation on the Z12 platform from 2009 through 2014. Pick the year range to see wheels and rims that fit. Base, S, SL, and Krom trims all share the same hub spec and the same measured fitment box.

The Nissan Cube Bolt Pattern

Every US Nissan Cube (2009-2014) uses 4x114.3 with a 66.1mm hub bore and M12x1.25 lug thread. Four lugs. The bolt pattern is the same across base, S, SL, and the Krom trim. 4x114.3 has the imperial nickname 4x4.5 (114.3mm = 4.5 inches exactly) and the two notations are identical. M12x1.25 is the Japanese fine pitch standard, different from the M12x1.5 found on most American and European cars. Confirm M12x1.25 if you are buying lug nuts separately from the wheels.

The Z12 Cube sits on Nissan's B platform, the same foundation as the first generation Versa (2007-2013). The hub spec lines up across both cars: same 4x114.3 bolt pattern, same 66.1mm hub bore, same M12x1.25 thread. Wheels that fit the first generation Versa bolt across to the Cube within the same factory diameter window. Important: the second and third generation Versa (2014 and up) moved to 4x100, so Versa wheels from a 2014 or newer Versa do NOT fit the Cube.

Compare across the rest of the Nissan lineup at our Nissan wheels and rims hub.

Cube Trim and Krom Detail

The Cube is a 5 door front wheel drive subcompact with the squared off body that defined the Z12 generation. It ran a single 1.8 liter four cylinder engine across the lineup, paired with a CVT or a 6 speed manual on early trims. The Krom (2009-2010) was a styling and audio package on the Z12 chassis with darker exterior trim and an upgraded audio system, but the wheel spec was the same as the base Cube. Every Z12 Cube shares the same 4x114.3 / 66.1mm bolt pattern and hub bore, so our measured fitment box treats every trim as a single window. The Cube ran a 15 inch wheel on most factory trims, with 16 inch and 17 inch the standard one-step and two-step visual upgrades.

The Cube is square front and rear across every trim. There is no staggered fitment in the factory or aftermarket on this car. The Cube's body proportion is taller than a traditional hatchback, so wheel diameter changes show up more visually than on a low slung sedan. 17 inch is the most common upgrade choice and the best balance of visual presence and ride quality on the short Cube wheelbase. The aftermarket diameter window opens to 19 inch in our catalog.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Nissan Cube Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Z12 Cube. For the Cube that means clearance from the wheel to the fender on the boxy short wheelbase body, gap between the back of the wheel and the front strut on the front wheel drive layout, brake caliper height, hub bore confirmation on the 66.1mm hub, lug seat depth on the M12x1.25 thread, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Cube is a tall body subcompact with a small factory wheel and limited fender room. The mistake we see most often on this car is buyers ordering a 4x100 wheel intended for a 2014 or newer Versa, assuming the Cube shares the bolt pattern. It does not. The Cube is 4x114.3, the same as the first generation Versa (2007-2013), not the 4x100 found on the 2014 and newer Versa. We confirm the bolt pattern, the hub bore, and the brake clearance before any wheel ships.

Nissan Cube Wheels and Rims FAQ

Get Nissan Cube Wheels Right the First Time

Pick the year range above to see wheels and rims that fit. We measure on the Z12 Cube as a single fitment box across base, S, SL, and Krom trims, with the 4x114.3 bolt pattern, 66.1mm hub bore, and the Japanese M12x1.25 thread pitch confirmed before any wheel ships. Find your fit and start enjoying your build sooner.