Nissan Quest Wheels and Rims

Nissan Quest Aftermarket Wheel Fitment

The Nissan Quest is Nissan's minivan, sold in the US from 1993 through 2017 across three generations. Element Wheels measures the Quest across every generation Nissan has sold in the US: the first generation (1994-2003), the second generation (2004-2010), and the third generation (2011-2017). The bolt pattern, hub bore, and lug thread stay the same across all three generations. Every Quest uses 5x114.3 with a 66.1mm hub bore and the Japanese M12x1.25 fine pitch lug thread. The aftermarket diameter window runs from 16 inch up to 20 inch, with 17 inch and 18 inch the most common choices on this body. Nissan discontinued the Quest in the US after the 2017 model year.

Find Your Nissan Quest Generation

Pick your year range to see wheels and rims that fit your specific Quest. The bolt pattern is 5x114.3 / 66.1mm hub bore across every generation. Each generation has its own measured offset window even though the wheels bolt across in stud pattern.

The Nissan Quest Bolt Pattern

Every Nissan Quest (1994 and up through the 2017 final year) uses 5x114.3 with a 66.1mm hub bore and M12x1.25 lug thread. Five lugs. The bolt pattern is stable across all three Quest generations. 5x114.3 has the imperial nickname 5x4.5 (114.3mm = 4.5 inches) and the two notations are identical. M12x1.25 is the Japanese fine pitch standard, different from the M12x1.5 found on most American and European cars. Confirm M12x1.25 if you are buying lug nuts separately from the wheels.

Important: 5x114.3 is NOT the same as 5x115. The two patterns sit only 0.7mm apart and do not bolt across. The 5x4.5 imperial nickname refers specifically to 5x114.3. 5x115 lives on cars like the Chrysler 300 and the Dodge Charger LX. If a wheel listing says "5x115" without offering 5x114.3, it does not fit the Quest.

Compare across the rest of the Nissan lineup at our Nissan wheels and rims hub.

Why the Quest Generation Determines Wheel Fit

The Quest is a front wheel drive unibody minivan across every generation. The first generation Quest (1994-2003) was built alongside the Mercury Villager on a shared US-built platform. The Quest and the Villager are the same chassis from that era and share the same hub spec. The second generation Quest (2004-2010) moved to a Nissan-built platform shared with the Nissan Maxima and Altima of that era, an all-Nissan vehicle without the Mercury sibling. The third generation Quest (2011-2017 / RE52) shares its platform with the JDM-market Nissan Elgrand E52. The Elgrand sibling is why the third generation Quest carries the distinct boxy minivan look. Bolt pattern, hub bore, and lug thread stay identical across every Quest (5x114.3 / 66.1mm CB / M12x1.25). What changes between generations is the suspension geometry, the brake hardware, and the wheel face clearance window the aftermarket needs to sit over. Each generation has its own measured offset range even though the wheels bolt across in stud pattern.

The Quest is square front and rear across every generation. There is no staggered fitment in the factory or aftermarket on this car. The aftermarket diameter window opens at 16 inch and runs to 20 inch across all three generations. 17 inch and 18 inch are the most common upgrade choices. The Quest carries seven or eight passengers depending on trim and the load tolerance on the wheel matters more on this body than on a car or crossover. We confirm load rating on every wheel we recommend for the Quest.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Nissan Quest Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every Quest generation from the 1994 first generation through the 2017 final year. For the Quest that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension on the front wheel drive layout, brake caliper height, hub bore confirmation on the 66.1mm hub, lug seat depth on the M12x1.25 thread, turning clearance at full lock, and the load rating that the minivan body needs from the wheel. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

The Quest is a front wheel drive minivan, and the mistakes we see on this car are usually 5x115 wheels ordered for a 5x114.3 hub (those two patterns are not interchangeable) and wheels with a low load rating ordered for a passenger van body. We confirm the bolt pattern, the hub bore, the brake clearance, and the load rating before any wheel ships.

Nissan Quest Wheels and Rims FAQ

Get Nissan Quest Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Quest platform across every generation from 1994 through the 2017 final year, confirm the load rating that the minivan body needs from the wheel, and verify the Japanese M12x1.25 thread pitch before any wheel ships. Find your fit and start enjoying your build sooner.