Scion xA Wheels and Rims

Scion xA Aftermarket Wheel Fitment

The Scion xA is the compact 5-door hatchback Scion sold in the US between 2004 and 2006 as the brand's launch model alongside the 1st generation xB. It is the US badge of the Toyota ist that ran in Japan on the Toyota P60 (NCP60) Yaris platform. The xA ran one bolt pattern across the entire US production run: 4x100 with a 54.1mm hub bore, M12x1.5 lug studs, and four lug per corner. The car stays front-wheel-drive, runs matched front and rear wheel size, and lives in a 15-18 inch diameter window with 6-7.5 inch width range. Element Wheels measures the xA directly so the aftermarket box stays honest for a compact car where fender clearance and ride quality both matter at the upper end of the diameter range.

Find Your Scion xA

The Scion xA ran one generation in the US (2004-2006). Pick your year below to see wheels and rims that fit.

The Scion xA Bolt Pattern

The Scion xA runs 4x100 with a 54.1mm hub bore. That is the same compact Toyota fitment used on the 1st generation Scion xB (2004-2007), the Scion iQ (2012-2015), the Scion iA (2016), and the Toyota Yaris and Toyota Echo of the same era. If you're cross-shopping inside the small-Toyota family, the lug math and hub centering carry over. Lug count is four per corner, the bolt circle diameter is 100mm, and the lug studs are M12x1.5. One bolt pattern across the entire US xA production run. No year-cutoff to plan around inside the model.

Worth flagging clearly: 4x100 is a small-car compact pattern. Some shoppers see "100mm" and assume it crosses to 4x108 or 4x114.3 because the numbers look close. They do not. The bolt circle diameter is the actual measurement between the lugs and a difference of a few millimeters means the wheel will not mount. Confirm 4x100 specifically before buying. Compare across the rest of the Scion lineup at our Scion wheels and rims hub.

Why the xA Runs Square Fitment

The Scion xA is built on Toyota's NCP60 platform shared with the Toyota ist in Japan and the Toyota Yaris compact family. The wheel hardware (4x100 / 54.1mm / M12x1.5) is the small-Toyota compact spec common to the Yaris, Echo, ist, and the rest of the early Scion small-car lineup. The car stays front-wheel-drive across all three model years with matched front-rear brake hardware, no all-wheel-drive variant, and no factory staggered fitment. Element catalog rows for the xA are square front-to-rear by design.

Cross-shop implication. A same-era 1st generation Scion xB (2004-2007), a Toyota Yaris (2006 and later in the US, earlier in other markets), or a Toyota Echo (2000-2005) wheel will share lug math and hub centering with the xA (all run 4x100 / 54.1mm). The wheel still needs to be confirmed against the xA body specifically because the xA hatchback geometry differs slightly from the sedan and wagon variants of related Toyotas, but the bolt pattern and hub bore carry across.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Scion xA Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the xA. For the xA that means clearance from the wheel to the fender, gap between the back of the wheel and the front suspension, brake caliper height, hub bore confirmation at 54.1mm, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We do not pull specs from manufacturer sheets the way most retailers do. That measurement work is what produced the 15-18 inch diameter window and the 6-7.5 inch width range that keep an xA build from running into the fender at the 18 inch upper end.

Scion xA Wheels and Rims FAQ

Get Scion xA Wheels Right the First Time

Pick your xA above to see wheels and rims that fit. We measure on the xA directly, confirm 4x100 and 54.1mm on every listing, and keep the aftermarket window honest about fender clearance and ride quality at the upper diameter end. Find your fit and start enjoying your build sooner.