Suzuki Reno Wheels and Rims

Suzuki Reno Aftermarket Wheel Fitment

The Suzuki Reno is the 5-door hatchback Suzuki sold in the US between 2005 and 2008. The Reno is the US-market Suzuki-badged version of the Daewoo Lacetti hatchback, built on the GM Korea J200 platform. The Reno ran one bolt pattern across the entire US production: 4x114.3 with a 56.5mm hub bore, M12x1.5 lug studs, and four lug per corner. The Suzuki Forenza sedan and wagon ride on the same J200 platform and share identical wheel hardware with the Reno. Element Wheels measures the Reno directly to keep the aftermarket fitment box honest.

Find Your Suzuki Reno

The Suzuki Reno ran one generation in the US (2005-2008). Pick your year below to see wheels and rims that fit.

The Suzuki Reno Bolt Pattern

The Suzuki Reno runs 4x114.3 with a 56.5mm hub bore. 4x114.3 is also written as 4x4.5 in imperial (114.3mm = 4.5 inches). The 4x4.5 nickname applies to 4x114.3 ONLY and not to 4x115. The Reno uses four lug per corner (NOT five), so a five-lug wheel will not bolt up regardless of how close the spec sheet looks. Confirm 4x114.3 specifically before buying. Thread pitch on the Reno is M12x1.5 with a tapered lug seat (the GM Korea / Daewoo convention, NOT the Japanese-Suzuki M12x1.25 used on the Aerio and the Esteem). The 56.5mm hub bore is the Daewoo small-car centering bore.

Inside the Suzuki lineup, the Reno shares 4x114.3 / 56.5mm with the 2004-2008 Suzuki Forenza (the 4-door sedan and 5-door wagon version of the same J200 platform). That is the direct same-platform Suzuki cross-reference. The Aerio (4x100), Esteem (4x100), SX4 (5x114.3), and Grand Vitara (5x139.7 or 5x114.3 depending on generation) all use different bolt patterns or hub bores and will NOT cross with the Reno. Compare across the rest of the Suzuki lineup at our Suzuki wheels and rims hub.

The Daewoo Lacetti Same-Platform Lineage

The Reno is the Suzuki-badged version of the Daewoo Lacetti hatchback, engineered by GM Korea (then GM Daewoo) on the J200 platform. Suzuki sold the J200 in the US as the Reno (5-door hatchback) and the Forenza (4-door sedan and 5-door wagon). All three body styles share the same wheel hardware. The bolt pattern (4x114.3), hub bore (56.5mm), thread pitch (M12x1.5), brake hardware (matched front and rear), diameter range, and width range all carry across the Reno hatch, Forenza sedan, and Forenza wagon. The Reno was front wheel drive only in the US, with no all wheel drive variant offered.

Cross-shop implication. The 2004-2008 Suzuki Forenza is the closest cross-reference (same J200 platform, identical fitment hardware). Width and offset still need to be confirmed against the Reno hatchback body specifically. The Daewoo Lacetti shares the underlying platform and engineering with the Reno but is not sold in the US. Important distinction: the Reno's M12x1.5 thread pitch is the GM Korea convention and does NOT carry over from the Japanese-Suzuki small-car lineup (the Aerio and the Esteem run M12x1.25). Customers cross-shopping wheels from a Japanese-Suzuki donor car need to confirm thread pitch before assuming compatibility.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Suzuki Reno Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Reno. For the Reno that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation at 56.5mm, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We do not pull specs from manufacturer sheets the way most retailers do. That measurement work is what produced the 15-17 inch diameter window and the 5.5-7.5 inch width range for the Reno, and why we are confident the same fitment box applies across the Reno hatchback, the Forenza sedan, and the Forenza wagon on the same J200 platform.

Suzuki Reno Wheels and Rims FAQ

Get Suzuki Reno Wheels Right the First Time

Pick your Reno above to see wheels and rims that fit. We measure on the Reno directly, confirm 4x114.3 and 56.5mm on every listing, and keep the aftermarket window honest about ride quality and brake clearance on the hatchback body. Find your fit and start enjoying your build sooner.