Suzuki Verona Wheels and Rims

Suzuki Verona Aftermarket Wheel Fitment

The Suzuki Verona is the midsize 4-door sedan Suzuki sold in the US between 2004 and 2006. The Verona is the US-market Suzuki-badged version of the Daewoo Magnus, built on the GM Korea V200 platform. The Verona is notable for being one of the few midsize sedans of its era to mount a 2.5L inline-six engine transversely. The Verona ran one bolt pattern across its entire US production: 4x114.3 with a 56.5mm hub bore, M12x1.5 lug studs, and four lug per corner. Element Wheels measures the Verona directly to keep the aftermarket fitment box honest. Compare across the rest of the Suzuki lineup at our Suzuki wheels and rims hub.

Find Your Suzuki Verona

The Suzuki Verona ran one generation in the US (2004-2006). Pick your year below to see wheels and rims that fit.

The Suzuki Verona Bolt Pattern

The Suzuki Verona runs 4x114.3 with a 56.5mm hub bore. 4x114.3 is also written as 4x4.5 in imperial (114.3mm = 4.5 inches). The 4x4.5 nickname applies to 4x114.3 ONLY and not to 4x115. The Verona uses four lug per corner (NOT five), so a five-lug wheel will not bolt up regardless of how close the spec sheet looks. Confirm 4x114.3 specifically before buying. Thread pitch on the Verona is M12x1.5 with a tapered lug seat (the GM Korea / Daewoo convention). The 56.5mm hub bore is the Daewoo midsize-car centering bore.

Inside the Suzuki lineup, the Verona shares its 4x114.3 / 56.5mm lug hardware with the 2004-2008 Suzuki Forenza (4-door sedan and 5-door wagon) and the 2005-2008 Suzuki Reno (5-door hatchback). All three are Daewoo rebadges on related but distinct platforms (Verona is V200, Forenza and Reno are the smaller J200). Because the chassis is different and the body is a midsize sedan, the Verona's diameter range runs an inch larger than the Reno and Forenza compact range. Width still tops at 7.5 inch, matching the Forenza and Reno. The Aerio (4x100), Esteem (4x100), SX4 (5x114.3), and Grand Vitara (5x139.7 or 5x114.3 depending on generation) all use different bolt patterns or hub bores and will NOT cross with the Verona.

The Daewoo Magnus Same-Platform Lineage

The Verona is the Suzuki-badged version of the Daewoo Magnus, engineered by GM Korea (then GM Daewoo) on the V200 platform. The Magnus / Verona is distinct from the smaller Daewoo Lacetti (which Suzuki sold here as the Forenza and Reno). The Magnus is a midsize sedan with a transverse inline-six powertrain that does not appear on the smaller Daewoo cars. The Verona was front wheel drive only in the US, with no all wheel drive variant offered. Inside the larger Daewoo family, the Magnus also appeared as the Chevrolet Epica in some markets and the Holden Epica in Australia.

Cross-shop implication. The Verona's 4x114.3 / 56.5mm / M12x1.5 lug hardware lines up with the Forenza and Reno even though the underlying chassis is different. A Verona wheel will bolt to a Forenza or Reno at the lug-pattern level. Width, offset, and brake clearance still need to match each car's fitment window because the bodies are different sizes. The Daewoo Magnus shares the underlying platform and engineering with the Verona but is not sold in the US.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Suzuki Verona Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Verona. For the Verona that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, brake caliper height, hub bore confirmation at 56.5mm, and turning clearance with the wheel and tire installed. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We do not pull specs from manufacturer sheets the way most retailers do. That measurement work is what produced the 15-18 inch diameter window and the 5.5-7.5 inch width range for the Verona midsize sedan body.

Suzuki Verona Wheels and Rims FAQ

Get Suzuki Verona Wheels Right the First Time

Pick your Verona above to see wheels and rims that fit. We measure on the Verona directly, confirm 4x114.3 and 56.5mm on every listing, and keep the aftermarket window honest about ride quality and brake clearance on the midsize sedan body. Find your fit and start enjoying your build sooner.