Vossen HF-2 Wheels & Rims

Vossen HF-2 Wheels at Element Wheels

The Vossen HF-2 is a mesh design from Vossen's Hybrid Forged series, and we carry it in more than 270 size and finish combinations: eight finishes, 19 to 24 inch diameters, and widths from 8.5 to 12 inches. Concave depth runs from flat to super deep depending on the width and offset you choose. We have detailed measurements for the vehicles these wheels go on, so the HF-2 setup we recommend is one that fits your car the first time. Every Vossen HF-2 wheel we sell is covered by our 100% Fitment Guarantee and free shipping on qualifying orders. Browse the finishes above, or use Shop by Vehicle to see only the HF-2 sizes that fit your car.

Vossen HF-2 Sizes

The concave profile follows the width. Narrow front sizes come flat or deep, and the wider 20 and 22 inch sizes reach super deep concave, which is where the HF-2 mesh looks its most aggressive on a staggered rear axle. Here is every HF-2 rim diameter and width we carry:

Each finish listing above carries a complete fitment table with the bolt pattern, offset, center bore, and price for every size, so you can compare exact specs before you order.

Vossen HF-2 Bolt Patterns and Custom Drilling

The HF-2 is sold two ways. Standard sizes come predrilled in 5x112, 5x114.3, 5x120, 5x127, 5x130, and 5x150, with offsets from as low as negative 18mm up to +52mm, and they ship fastest. Most of the catalog is built through Vossen's custom program instead: Vossen machines the bolt pattern, center bore, and offset to your vehicle, with drillings including 5x105, 5x108, 5x110, 5x112, 5x114.3, 5x115, 5x120, 5x127, 5x128, and 5x130.

Custom builds take longer than standard sizes, and each listing shows its own delivery estimate. Vossen describes the program as bridging the gap between forged wheel customization and cast wheel affordability, and it is what makes an offset or drilling possible when no standard size comes in it.

Vossen HF-2 Finishes

We carry the HF-2 in eight finishes. Gloss Black, Brushed Gloss Black, Tinted Matte Gunmetal, and Silver Polished Face cover the standard sizes. The satin finishes, Satin Black, Satin Bronze, Satin Silver, and Satin Anthracite, are built through Vossen's custom program, as are most Gloss Black sizes.

Brushed Gloss Black and Silver Polished Face put bare metal on the spoke faces, Satin Bronze is the warm option, and Satin Anthracite is a dark gray between black and silver. Every listing includes the AI Visualizer, so you can see the exact finish on your own car before you buy.

Vossen Hybrid Forged Construction

Hybrid Forged is Vossen's name for its flow formed wheels. The HF-2 starts as a cast wheel, then it is mounted to a flow forming drum and heated while its barrel is formed under pressure. The HF-2 takes its mesh design from its forged counterpart in Vossen's fully forged line, the S17-01.

Every HF-2 in our catalog carries a load rating of 2,611 lbs per wheel, which is why the same design shows up in our gallery on a Corvette C8 and on a Range Rover.

Vossen HF-2 Fitments From Our Customer Gallery

These are real HF-2 setups from our customer gallery, each recorded with the exact sizes and offsets. Every one runs on factory suspension with no rubbing. They show the range of the design, from a square 19 inch set on a Mercedes-Benz GLA to staggered 22s on a Lexus LC 500 and 24s on a Range Rover. The Corvette C8 build runs a 19 inch front and a 20 inch rear, the double staggered setup that matches the C8's factory layout.

Other Vossen Hybrid Forged Designs

The HF-2 shares its construction and custom program with the rest of the Hybrid Forged series. If you want the same construction with a different spoke design, these Hybrid Forged designs are also in our catalog. The full lineup is on our Vossen wheels page.

How We Confirm Fitment on Vossen HF-2 Wheels

We measure fitment on real vehicles at our Chandler, Arizona facility rather than trusting spec sheets: wheel to fender clearance, strut clearance, caliper height, hub bore, lug seat geometry, and turning clearance at full lock. That matters most on the HF-2 because the custom program lets you order offsets that standard wheels never come in, and a wrong number on a wide rear wheel shows up as poke past the fender or a tire on the strut.

That measurement work is why every Vossen HF-2 set we recommend for your vehicle is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent.

Vossen HF-2 Wheels and Rims FAQ

Get Vossen HF-2 Wheels Right the First Time

Pick a finish above or use Shop by Vehicle and let us narrow the HF-2 to your exact car. Eight finishes, five diameters, and custom drilling when the standard sizes do not cover your fitment. Confirm your fit and get the build moving.

Related Wheels

Shop by Wheel Size

Shop by Finish

Shop by Style

Shop by Vehicle & Use