Audi RS7 Wheels and Rims

Audi RS7 Aftermarket Wheel Fitment

The Audi RS7 is the full-performance variant of the A7 executive fastback, sitting above the warm S7 in the A7 family. The RS7 line started with the C7 sportback in 2014 and has continued into the current C8 generation (2021 and up). Element Wheels measures the RS7 across both modern generations with the brake package as a hard variable: each generation splits into a steel-brake variant and a carbon-ceramic-brake variant, tracked as separate catalog rows. Bolt pattern is 5x112 with a 66.56mm hub bore and M14x1.5 lug bolts across every RS7. Quattro AWD is standard on every car. The RS7 is the same chassis as the A7 and S7 of the same generation, so the bolt math crosses, but the RS7 ships with the largest Audi brake package on the A7 platform and the widest factory wheel of any A7-platform car. The carbon-ceramic variant tightens the offset window further than the steel-brake variant on the same chassis. Pick your generation and brake package below for the fitment specs that apply.

Find Your Audi RS7 Generation and Brake Package

Pick your chassis and brake package to see wheels and rims that fit your specific RS7. Bolt pattern is 5x112 across every modern RS7 with a 66.56mm hub bore and M14x1.5 lug bolts. The brake package is what shifts the practical offset window. Looking for the standard or warm performance variants? Visit the Audi A7 hub or the Audi S7 hub.

The Audi RS7 Bolt Pattern

Every modern RS7 uses 5x112 with M14x1.5 lug bolts. Audi runs lug bolts on the RS7, not studs and nuts the way most American and Asian platforms do. The lug bolt threads directly into the hub, the wheel sits between the head of the bolt and the hub face, and there is no fixed lug stud to align the wheel before tightening. This makes a hub-centric fit important on the RS7. The centerbore is 66.56mm on both the C7 (2014-2018) and the current C8 (2021 and up). The RS7 line started in the C7 era so 66.56mm has been the spec from day one on this nameplate.

Same-chassis cross-shopping: a wheel that fits a C7 A7 or C7 S7 of the right offset will bolt to a C7 RS7, and the same on the C8. The bolt math works because the RS7 sits on the A7 chassis. What does not always cross is the front brake clearance, because the RS7 ships with a larger brake package than the S7 (and the carbon-ceramic RS7 steps that up again). A wheel that fit a C7 A7 with a deeper offset can sit too close to the RS7 front caliper. Compare against the A7 chassis hub at our Audi A7 wheels and rims hub, against the S7 hub at our Audi S7 wheels and rims hub, and against the rest of the Audi lineup at our Audi wheels and rims hub.

Why the RS7 Brake Package Tightens the Aftermarket Window

The RS7 ships with the largest Audi brake package on the A7 platform. Front brake is larger than rear across every modern RS7 generation, which is standard on a full-performance sedan of this caliber where the front axle does the majority of the braking work. The practical aftermarket implication: the limiting fitment dimension on the RS7 is the front caliper top, not the rear. Inner-barrel clearance behind the wheel face on the front determines whether a wheel clears at all, before fender clearance or tire fitment.

Each RS7 generation splits into a steel-brake variant and a carbon-ceramic-brake variant, and we track them as separate catalog rows. The carbon-ceramic caliper is physically larger than the steel caliper on the same chassis, so the carbon-ceramic RS7 has a tighter aftermarket offset window than the steel-brake RS7 on the same chassis. The C8 RS7 (2021 and up) also ships with the widest factory wheel of any RS7 generation. Our measured catalog shows a single 10.5 inch wheel width across both the steel and carbon-ceramic C8 RS7 rows, rather than a width range. That reflects how narrow the right answer is on this platform. Quattro AWD is standard on every RS7, so drivetrain is not a fitment variable.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Audi RS7 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including every RS7 generation and both brake variants. For the RS7 that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, front caliper height (the limiting front clearance dimension on this chassis, especially on the carbon-ceramic variant), rear caliper height, hub bore confirmation at 66.56mm, and lug bolt seat depth for M14x1.5 bolts. The steel-brake row and the carbon-ceramic-brake row are measured separately on the same physical car so the offset windows are not inferred from one another. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Audi RS7 Wheels and Rims FAQ

Get Audi RS7 Wheels Right the First Time

Pick your chassis and brake package above to see wheels and rims that fit. We measure on the RS7 platform across the C7 and C8, track steel and carbon-ceramic brake variants as separate catalog rows, and split the C8 RS7 from the A7 and S7 because the brake package and factory wheel width are different again. Find your fit and start enjoying your build sooner.