Dodge Avenger Wheels and Rims

Dodge Avenger Aftermarket Wheel Fitment

The Dodge Avenger nameplate covers two very different cars across two production runs. The 1st gen Avenger (1995-2000) was a front wheel drive coupe built on a Mitsubishi-engineered platform, sold alongside the Chrysler Sebring coupe and the Eagle Talon of the same era. The 2nd gen Avenger (2008-2014) was a mid-size front wheel drive sedan on the Chrysler JS platform, sold alongside the first gen Chrysler 200 (formerly Sebring sedan). Despite the eight year gap between generations and the body style change from coupe to sedan, every Avenger we have measured uses 5x114.3 with a 67.1mm hub bore and M12x1.5 lug nuts. The bolt math carries cleanly across both generations. The aftermarket diameter window does not, because the early-90s coupe and the late-2000s sedan have different fender geometry. Element Wheels measures both generations and tracks them as separate fitment families. Find your wheels and rims below.

Find Your Dodge Avenger Generation

Pick your generation to see wheels and rims that fit your specific Avenger. The two generations share the same bolt pattern and hub bore but sit on entirely different chassis. The 1st gen coupe and the 2nd gen sedan are not the same car under different skin, they are different vehicles that happen to share a nameplate.

The Dodge Avenger Bolt Pattern

Every Dodge Avenger we have measured uses 5x114.3 with a 67.1mm hub bore. That covers the 1995-2000 coupe and the 2008-2014 sedan. 5x114.3 also goes by the imperial nickname 5x4.5 (114.3mm equals 4.5 inches), so a wheel listing labeled "5x4.5" is the same bolt pattern as 5x114.3 and will fit either Avenger generation. The lug spec is M12x1.5 lug nuts on traditional studs.

Important safety note: 5x114.3 is NOT the same as 5x115. The two patterns are separated by 0.7mm, and the studs do not line up cleanly. The Dodge Charger and Challenger run 5x115 (not 5x114.3), so wheels from a Charger or Challenger will NOT fit an Avenger. 5x114.3 is also NOT the same as 5x110, which is the pattern on the Dart, the second generation Chrysler 200, and the Cherokee KL. The Avenger sits on its own pattern family within the late-2000s Dodge lineup. Compare across the rest of the Dodge lineup at our Dodge wheels and rims hub.

1st Gen Coupe vs 2nd Gen Sedan Avenger Fitment

The two Avenger generations are essentially different cars under one nameplate. The 1st gen Avenger (1995-2000) was a two door coupe built on a shared Mitsubishi-Chrysler platform that also produced the Chrysler Sebring coupe and the Eagle Talon. It was front wheel drive only, ran a 16 to 17 inch factory wheel, and used 5x114.3 / 67.1mm with M12x1.5 lugs. The 2nd gen Avenger (2008-2014) was a four door sedan on the Chrysler JS platform, sold as a fleet and retail mid-size sedan alongside the first generation Chrysler 200 (which was a renamed Sebring sedan). It ran 17 to 18 inch factory wheels with the same 5x114.3 / 67.1mm / M12x1.5 spec. Both generations are square (same width front and rear) and front wheel drive.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Dodge Avenger Wheels

Element Wheels measures fitment on the Avenger directly across both generations. For the Avenger that means clearance from the wheel to the fender on both axles, gap between the back of the wheel and the strut tower and suspension components, brake caliper height (equal-size front and rear brakes on both generations), hub bore confirmation at 67.1mm, lug seat depth for the M12x1.5 thread, and turning clearance on the front at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

That measurement work is what lets us flag the Avenger's pattern crossover risks directly. Customers occasionally cross-shop wheels between an Avenger sedan and a Dodge Dart on the assumption that they are related platforms (the Dart launched in 2013, during the late years of the 2nd gen Avenger production run). They are not. The Avenger sedan runs 5x114.3 on 67.1mm and the Dart runs 5x110 on 65.1mm. Different patterns, different hub bores, different lug threads. The Dart was the compact replacement for the Caliber hatchback on a new platform (CUSW), not a successor to the Avenger sedan.

Dodge Avenger Wheels and Rims FAQ

Get Dodge Avenger Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Avenger directly across both the 1st gen coupe and the 2nd gen sedan, verify the 5x114.3 / 67.1mm interface on every wheel, and confirm the M12x1.5 lug spec before we publish a fitment. Find your fit and start enjoying your build sooner.