Dodge Magnum Wheels and Rims

Dodge Magnum Aftermarket Wheel Fitment

The Dodge Magnum is a 2005-2008 LX-platform wagon, built alongside the 300 and the Charger on the same Chrysler chassis architecture. Element Wheels measures fitment on every Magnum trim we cover: rear wheel drive base, SE, SXT, and R/T; all wheel drive R/T; and the SRT8 6.1L HEMI flagship with the Brembo front brake package. Every Magnum we cover uses the same 5x115 bolt pattern with a 71.5mm hub bore, M14x1.5 lug thread, and 5 lugs. Pick the trim row below.

Find Your Dodge Magnum Trim

The 2005-2008 Magnum splits into three fitment rows based on drivetrain and brake package. Bolt pattern stays 5x115 across every trim, but the SRT8's front Brembo brake assembly is bigger than the standard front brake, and the AWD drivetrain locks fitment into a must-be-square configuration. Pick your trim below.

The Dodge Magnum Bolt Pattern

Every 2005-2008 Dodge Magnum uses a 5x115 bolt pattern with a 71.5mm hub bore and an M14x1.5 lug thread. The 5x115 pattern carries across the entire LX platform of that era, which means the Magnum shares its hub geometry with the Chrysler 300, the Dodge Charger, and the later Dodge Challenger. A wheel that fits a 2006 Charger R/T also fits a 2006 Magnum R/T of the same year, all else equal. This is one of the few platform-wide hub consistencies that customers can actually use when cross-shopping the aftermarket.

Important distinction: 5x115 is NOT the same as 5x114.3. The two patterns sit only about 0.7mm apart on the bolt circle, which is close enough to look interchangeable on a spec sheet but far enough apart that running a 5x114.3 wheel on a 5x115 hub will stress the studs and is a safety concern. The 5x4.5 imperial nickname (114.3mm = 4.5 inch) refers only to 5x114.3, never to 5x115. The Magnum is 5x115 specifically. Compare across the rest of the Dodge lineup at our Dodge wheels and rims hub.

Trim Differences Across the Dodge Magnum

The Magnum has three fitment rows because of two factors that move with the trim: drivetrain and brake package. Bolt pattern, hub bore, and lug thread are identical across every Magnum we cover. What changes is the offset window and the stagger geometry.

The rear wheel drive Magnum (base, SE, SXT, R/T) accepts either a square fitment or a staggered fitment, customer preference. The all wheel drive R/T must run a square fitment because the AWD system requires the same rolling diameter at all four corners. The SRT8 carries a meaningfully larger front Brembo brake assembly than the standard car; aftermarket wheels that clear a base Magnum's front caliper still need to be checked against the SRT8's front Brembo specifically before they will fit. The SRT8 was rear wheel drive only; there was no AWD SRT8 Magnum.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Dodge Magnum Wheels

Element Wheels measures fitment on the Magnum directly, across the rear wheel drive trims, the all wheel drive R/T, and the SRT8 with its 6.1L HEMI and front Brembo brake package. For the Magnum that means hub bore confirmation at 71.5mm, clearance from the wheel to the fender on a stock-height car, gap between the back of the wheel and the front strut, brake caliper height at both the standard LX spec and the SRT8's bigger front Brembo, lug seat depth, and lug thread confirmation at M14x1.5. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull these from manufacturer spec sheets the way most retailers do.

Dodge Magnum Wheels and Rims FAQ

Get Dodge Magnum Wheels Right the First Time

Pick your trim row above to see wheels and rims that fit. We measure across the rear wheel drive Magnum, the all wheel drive R/T, and the SRT8 with its front Brembo brake package. Find your fit and start enjoying your build sooner.