Hyundai Azera Wheels and Rims

Hyundai Azera Aftermarket Wheel Fitment

The Hyundai Azera is the full-size front wheel drive sedan Hyundai sold in North America from 2006 through 2017. The Azera was the flagship Hyundai sedan slot above the Sonata for those years, and the direct successor to the Hyundai XG. The Azera came in two generations during US sales. The 1st gen (TG chassis, 2006-2011) was the launch car, with a 3.8L V6 across most trims. The 2nd gen (HG chassis, 2012-2017) was a larger and more refined redesign with sharper styling and a continued V6 powertrain. Both generations use the same 5x114.3 bolt pattern, 67.1mm hub bore, and M12x1.5 thread, so the Azera is a single-pattern car across its US lifespan. Hyundai discontinued the Azera in North America after the 2017 model year (the nameplate continued as the Grandeur in Korea), so the platform is now a closed historical range, but the aftermarket window is well documented. Pick your generation below.

Find Your Hyundai Azera Generation

Pick your year range to see wheels and rims that fit your specific Azera. Bolt pattern (5x114.3), hub bore (67.1mm), and thread (M12x1.5) are identical across both generations. The fitment box differences are in diameter and width: the 2nd gen runs a wider and larger aftermarket window than the 1st gen.

The Hyundai Azera Bolt Pattern

Every Azera sold in North America uses 5x114.3 with a 67.1mm hub bore, M12x1.5 thread, and 5 lugs. The 1st gen (TG, 2006-2011) and 2nd gen (HG, 2012-2017) carry the same pattern, hub bore, and thread pitch. The aftermarket window does shift between generations on diameter and width (the 2nd gen runs a larger box), but the mounting interface itself is unchanged.

The imperial nickname for 5x114.3 is 5x4.5, since 114.3mm equals exactly 4.5 inches. That pattern is shared across the modern Hyundai-Kia mid-size and full-size sedan lineup, the Honda Civic from 2004 forward, the Nissan Altima, most Toyota Camry generations, and the Mazda6. It is one of the most common 5-lug patterns in the modern automotive market, which gives the Azera one of the deeper aftermarket wheel pools for a full-size FWD sedan from this era.

One detail that catches buyers: 5x114.3 is NOT the same as 5x115 used on some American sedans (the Chrysler 300, the Dodge Charger LX, the Buick Lucerne). The two patterns sit only 0.7mm apart but they do not bolt across. The lug studs will not line up at that spacing. The 5x4.5 nickname refers specifically to 5x114.3 (114.3mm equals 4.5 inches). Wheels marketed as "5x4.5" without a metric callout are 5x114.3 wheels, which is the correct Azera pattern. Stick to 5x114.3 / 5x4.5 specifically on every Azera year.

Compare across the rest of the Hyundai lineup at our Hyundai wheels and rims hub. The Azera replaced the Hyundai XG in the lineup for 2006, and the XG carries the same 5x114.3 / 67.1mm spec, so the aftermarket wheel pool is shared between the two predecessor and successor cars.

Azera Generations and Trims

The 1st gen Azera (TG, 2006-2011) was Hyundai's first US-market full-size sedan to carry the Azera nameplate, replacing the XG that ran 2001-2005. The TG launched with the 3.8L V6 and conservative full-size sedan styling. The 2nd gen Azera (HG, 2012-2017) was a complete redesign, larger and more upscale, with the 3.3L V6 on most trims. The HG was the most luxurious Azera Hyundai sold in the US. Trim differences across the Azera lineup (base, Limited, etc.) do not affect bolt pattern, hub bore, or thread pitch. Every US Azera year runs the same 5x114.3 / 67.1mm / M12x1.5 mounting spec. The differences between gens show up in the aftermarket diameter and width window, not in the bolt pattern.

The Azera is a square (non-staggered) car across both generations. The same wheel spec works front and rear. There is no factory stagger on the Azera and our aftermarket window respects that. The Azera is also a front wheel drive sedan across its entire US lifespan. There is no AWD Azera in the US market.

How We Confirm Fitment on Hyundai Azera Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Azera across both generations. For the Azera that means clearance from the wheel to the fender, gap between the back of the wheel and the front suspension, brake caliper height across the trim lineup, hub bore confirmation on the 67.1mm hub, lug seat geometry across the M12x1.5 thread pitch, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Hyundai Azera Wheels and Rims FAQ

Get Hyundai Azera Wheels Right the First Time

Pick your generation above to see wheels and rims that fit. We measure on the Azera platform across the 1st gen TG (2006-2011) and 2nd gen HG (2012-2017). Both generations share the 5x114.3 / 67.1mm spec, so a wheel will bolt to either, but the aftermarket diameter and width windows are different. The Azera is a discontinued nameplate in North America after 2017, but the platform is well documented and the catalog covers every year. Find your fit and start enjoying your build sooner.