Hyundai Veracruz Wheels and Rims

Hyundai Veracruz Aftermarket Wheel Fitment

The Hyundai Veracruz is the mid-size 3-row crossover Hyundai sold in North America from 2007 through 2012 (sold as the ix55 in some global markets). The Veracruz was Hyundai's first serious entry in the 3-row family crossover segment and was the predecessor to today's Palisade in that slot. The Veracruz ran a single generation across its entire 6-year US production run, with no bolt pattern transition and no major fitment changes. Every Veracruz uses 5x114.3 with a 67.1mm hub bore and M12x1.5 thread. The Veracruz was available in front wheel drive and all wheel drive across the lineup, and both drivetrains share the same fitment box. Hyundai discontinued the Veracruz after the 2012 model year and replaced it in the lineup first with the Santa Fe XL (long wheelbase Santa Fe) and later with the Palisade. The platform is now a closed historical range, but the aftermarket window is well documented.

Find Your Hyundai Veracruz Generation

The Veracruz ran a single generation, 2007 through 2012, with no mid-cycle bolt pattern or hub bore changes. Every Veracruz year carries 5x114.3 / 67.1mm hub bore / M12x1.5 thread. Pick your year range below to see wheels and rims that fit. FWD and AWD variants share the same fitment box, so the drivetrain selection does not change the wheel you can buy.

The Hyundai Veracruz Bolt Pattern

Every Veracruz sold in North America uses 5x114.3 with a 67.1mm hub bore, M12x1.5 thread, and 5 lugs. The single-generation 2007-2012 run carries one mounting spec across every year and trim. The FWD and AWD versions share the same bolt pattern, hub bore, and thread pitch.

The imperial nickname for 5x114.3 is 5x4.5, since 114.3mm equals exactly 4.5 inches. That pattern is shared across the modern Hyundai-Kia mid-size sedan and crossover lineup, plus the Honda Civic from 2004 forward, the Nissan Altima, most Toyota Camry generations, and the Mazda6. It is one of the most common 5-lug patterns in the modern automotive market, which gives the Veracruz a strong aftermarket wheel pool for a mid-size 3-row crossover from this era.

One detail that catches buyers: 5x114.3 is NOT the same as 5x115 used on some American sedans (the Chrysler 300, the Dodge Charger LX, the Buick Lucerne). The two patterns sit only 0.7mm apart but they do not bolt across. The lug studs will not line up at that spacing. The 5x4.5 nickname refers specifically to 5x114.3 (114.3mm equals 4.5 inches). Wheels marketed as "5x4.5" without a metric callout are 5x114.3 wheels, which is the correct Veracruz pattern. Stick to 5x114.3 / 5x4.5 specifically on every Veracruz year.

Compare across the rest of the Hyundai lineup at our Hyundai wheels and rims hub.

Veracruz Drivetrains and Trims

The Veracruz was offered in front wheel drive and all wheel drive across the lineup. Both drivetrains carry the same 5x114.3 bolt pattern, 67.1mm hub bore, and M12x1.5 thread pitch. The aftermarket fitment box is the same for both FWD and AWD Veracruz years in our catalog. The AWD system on the Veracruz does not change the wheel mounting interface or restrict the fitment window relative to the FWD variant. Trims across the Veracruz lineup (GLS, SE, Limited) do not change bolt pattern, hub bore, or thread pitch. Every US Veracruz year and trim runs the same mounting spec.

The Veracruz is a square (non-staggered) crossover. The same wheel spec works front and rear. There is no factory stagger on the Veracruz, including the AWD variant, and our aftermarket window respects that. Drivetrain (FWD vs AWD) is not a fitment-box axis on this car: both share the same bolt pattern, hub, diameter, width, and offset window in our catalog.

How We Confirm Fitment on Hyundai Veracruz Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including the Veracruz across both FWD and AWD configurations. For the Veracruz that means clearance from the wheel to the fender, gap between the back of the wheel and the front suspension, brake caliper height across the trim lineup, hub bore confirmation on the 67.1mm hub, lug seat geometry across the M12x1.5 thread pitch, and turning clearance at full lock. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

Hyundai Veracruz Wheels and Rims FAQ

Get Hyundai Veracruz Wheels Right the First Time

Pick your year range above to see wheels and rims that fit. We measure on the Veracruz platform in both FWD and AWD configurations. The Veracruz is a discontinued model in North America after 2012, replaced first by the Santa Fe XL and then by the Palisade, but the aftermarket window is well documented and the catalog covers every year. Find your fit and start enjoying your build sooner.